[wrxboi]

now it says "BBCorrector Error: could not open tunnel - failed

[drgoodtymes]

Originally Posted by wrxboi

now it says "BBCorrector Error: could not open tunnel - failed

I tried the MDS box and got that same error too

[T-Roy]

I am not sure if anyone is working on the bbCorrector client. I would like to re-write it correct these issues and have it connect directly to Google rather then parse it through the server I wrote and just translate the results. bbCorrector was written in Eclipse which seems to have a complicated build process rather then just importing the project into the RIM JDE. I haven't had much luck with that so I haven't even started trying to recode the client.

[Michbb]

well now I am not sure what's going on... I fixed my dns error but now I get 401 error and says to check my username and password... but when I go to the site and put the exact same username and password it's fine

[Michbb]

Works when I take the username and password out

[mwyarm]

I installed BBCorrector on a 7280 and can see the spelling option but receive a fail message when selecting "spelling." The message is "BBCorrector Error: could not open tunnel - failed."

I have done the following:
1) rebooted multiple times - up to 5 now - after each config change
2) I have selected "disable MDS proxy" - this was required because it would never attempt to connect to the server and just issue the could not find service book entry for IPPP - resolved
3) I have tried both regular and secure server
4) I have validated that firewalls are "disabled"
5) I have no entry in user and password within application - did not change error result
6) I changed TLS default to "handlheld" and protocol is set to "TLS/SSL"

I have read this whole thread and something is still amiss - any help would be greatly appreciated.

[Inphektion]

Originally Posted by DavidE

The new bbCorrector servers are acting a bit strange with my 7290.

I created a document with these words: "This is a tesst of the tje emergency broadcast system." After I chose Spelling from the menu, both "tesst" and "tje" were underlined, as expected. I used the Spelling Suggestion to select "test" to replace "tesst." The sentence then became: "This itest of the tje emergency broadcast system." bbCorrector is replacing the word, as well as the four previous characters.

Both servers (basic and secure) give the same result.

DavidE
www.davidenglish.com
www.classicfilmpreview.com

Yea same issue here, 8700c with 4.1. This would be good without this issue but now useless.

[drgoodtymes]

Anyone ever get this working correctly? on os 4.1

[blackspawn]

mine works, i'm using it on my BB 7250. Only thing i find is when it finds spelling error, it will give suggestions but it may delete first letter beside it. Exp. "The Dog is heree." Correction will show " The Dog ihere." But besides that, everything ok.

[Altoid]

Originally Posted by drgoodtymes

I have installed the app, and tried both servers, and searched, can't find answer to the error I get.
BBcorrector error: could not find service book entry for IPPP

I checked the service books on my BB 8700 and I have an IPPP for BIS service book there, any thoughts?

I am having same problem, anybody know why and what i need to do?

thx,

[BES admin]

Originally Posted by blackspawn

mine works, i'm using it on my BB 7250. Only thing i find is when it finds spelling error, it will give suggestions but it may delete first letter beside it. Exp. "The Dog is heree." Correction will show " The Dog ihere." But besides that, everything ok.

I just installed and began using the application on my 8700c 4.1os today. I am having this problem with the app as well.

Anyone get this to work or have another suggestion for free spelling software?

Thanks so much.

[ComputerGeek96]

T-roy, have you found anything out about the new version of the BB OS overwriting 3 or 4 charactors to the right of what its actually correcting??

[tateu]

I have modified the client for new BB OS versions. It works in the simulator but I don't have a secure API license so I can't load it on my Blackberry to test. I am in contact with one of the admins for the Blackberry Tools site and I am trying to get it signed so I can officially test it. Then, if it works, the modified version should get posted.

The source code for my modifications and a JDE 4.1 project file are located in the patches section.

[T-Roy]

Originally Posted by tateu

I have modified the client for new BB OS versions. It works in the simulator but I don't have a secure API license so I can't load it on my Blackberry to test. I am in contact with one of the admins for the Blackberry Tools site and I am trying to get it signed so I can officially test it. Then, if it works, the modified version should get posted.

The source code for my modifications and a JDE 4.1 project file are located in the patches section.

Oooo Cool

[gary599]

I get this error when I try to run it

This version will only work on Nextel Blackberry 7520

WOW like I did not know this, and thats what I have a 7520

[SimonMac]

Originally Posted by tateu

I have modified the client for new BB OS versions. It works in the simulator but I don't have a secure API license so I can't load it on my Blackberry to test. I am in contact with one of the admins for the Blackberry Tools site and I am trying to get it signed so I can officially test it. Then, if it works, the modified version should get posted.

The source code for my modifications and a JDE 4.1 project file are located in the patches section.

I await with baited breath!

[fkatsumi]

I tested the code written by Josh Harris in my JDE. I tested with the latest simulator code 4.1.0.194 and looks good. I'll see if I can sign it with my key and have others test. I'm pretty new to BB coding so please be patient (my JDE is so slow in editing).

Fred

[rickthornton]

I followed the instructions, tried both servers and get the same error message on my 8700C. I would love to be able to make this work and any help would be appreciated.

[tateu]

Originally Posted by fkatsumi

I'll see if I can sign it with my key and have others test.

That'd be great since I still haven't found anyone else to sign it for me. If you don't mind, can you PM me with a link when you get it signed? Then, if it works, we can hopefully get it posted to the official site.

Thanks,

Josh

[SkyPilot]

I get bad dns when I try as well
Any help is appreciated
SkyPilot telus 7520 with 4.1