[rmalm]

Question One:

First of all, I love edge but since I moved more towards a rural area Edge does not work as well. GPRS however has full strength but does not become enabled unless EDGE has zero service. I would like to be able to switch from EDGE and GRPS manually or configure my Blackberry to have GPRS as default service and EDGE as backup.

Second Question:

Also since I moved I keep receiving email stating "do not delete, keep for server" and a new icon has been added to my homepage "enterprise activation". I click to activate and make up a user name and a password. It goes for a long time but does not activate. What am I doing wrong?

Thank you...

[EricaJ1074]

I'm going to take a guess with number 2 and ask if you are on a BES with your company. If not, then simply hide this icon by highlighting the icon, click the trackwheel and ALT key and choose "Hide Icon."

[BlueFlames]

What mean between Edge and GPRS??? I don't get it???

[rmalm]

It seems that my blackberry switches from EDGE to GPRS. If Edge goes to zero then GPRS picks up. Where I live GPRS is high and edge is low, but edge is the default so eventhough GPRS has full service it will stay connected to EDGE with less then one bar.

[d_fisher]

Try registering the BlackBerry on the wireless network (Options > Host Routing Table > Register Now). Then hard reset it (remove battery). I don't know of any setting that will allow you to control GPRS/EDGE usage.

[rmalm]

I dont see the "Host routing table". I will try a hard reset

[NJBlackBerry]

Options > Advanced > Host Routing table...

[rmalm]

There are many different cingular options, does it matter which one I register with?

[NJBlackBerry]

No.

[rmalm]

That seems to of worked, I am now connected to GPRS. Thank you

[jdjleo]

Originally Posted by BlueFlames

What mean between Edge and GPRS??? I don't get it???

TDMA/CDMA - Time Division/Code Division Multiple Access-1st generation digital data

GPRS-General Packet Radio Service-2nd generation data technology

EDGE-Enhance Data rate for GSM Evolution-2.5 generation data technology(Most of Cingulars data coverage)

UMTS-Universal Mobile Telecommunications System-3g (this is where cingular is headed atm with UMTS available in small districts in major cities)

HSDPA-High Speed Data Packet Access-3.5g..the future..flying cars and all that...

Whoah geeked out there...gotta watch that....

here we go:

think like...GPRS = dialup... EDGE = DSL

[ardy_g]

actually, the reason why you automatically switch from EDGE to GPRS means that the area you are in has no EDGE.now if you go into an EDGE provided area(or move to another location where EDGE is available) it automatically switches back from GPRS to EDGE.there is no control or settings for switching from EDGE to GPRS or vice versa,this is a network access thing.
and as jdjleo mentioned above,EDGE is a much faster form of connection for GPRS.

[GMD0013]

I upgraded to a 7130c and had to switch from ATT to Cingular. I was setting up the device and when it displayed GPRS, started Enterprise Avtivation/email started to work (yes, BES) but it started switching from EDGE to GPRS randomly and once it stayed on EDGEn EDGE it couldnt even finish activation. Called Cingular cust. service and the lady said there has been a problem with EDGE for a week now, and that no email would work????? Tech support said there is no option to manually switch, and that tier3 was working on the problem.

[sd5187]

Originally Posted by BlueFlames

What mean between Edge and GPRS??? I don't get it???

There are many areas within this site that talk to GPRS and EDGE and what they mean.

GPRS - General Packet Radio Service. A GSM data transmission technique that does not set up a continuous channel from a portable terminal for the transmission and reception of data, but transmits and receives data in packets. It makes very efficient use of available radio spectrum.

EDGE - Further enhancements to GSM networks are provided by Enhanced Data rates for GSM Evolution (EDGE) technology. EDGE provides up to three times the data capacity of GPRS. Using EDGE, operators can handle three times more subscribers than GPRS; triple their data rate per subscriber, or add extra capacity to their voice communications. EDGE uses the same TDMA (Time Division Multiple Access) frame structure, logic channel and 200kHz carrier bandwidth as today's GSM networks, which allows it to be overlaid directly onto an existing GSM network. For many existing GSM/GPRS networks, EDGE is a simple software-upgrade.

[mblind]

Many times when I make voice call.. I notice that my BB 7130c switches to GPRS.. I hang up.. and right back to EDGE.. It only does this with voice NOT data.. I am in a Major metro area with REALLY strong signal. any ideas?

[Knightwise]

The problem I have is that the BB is set to GPRS but won't switch to GPRS ? I've tried the host routing table stuff, it says the message is sent but i get no entries in the list ? Is my BB locked ?

[NJBlackBerry]

What is the BB showing now? EDGE? GSM? gprs (lower case)?

What model BlackBerry do you have and what carrier? Are you subscribed to a BlackBerry Data Plan?

[Phone Guy]

Originally Posted by jdjleo

EDGE-Enhance Data rate for GSM Evolution-2.5 generation data technology(Most of Cingulars data coverage)

UMTS-Universal Mobile Telecommunications System-3g (this is where cingular is headed atm with UMTS available in small districts in major cities)

HSDPA-High Speed Data Packet Access-3.5g..the future..flying cars and all that...

Maybe this is too picky, but since we are educating folks...
HSDPA - High Speed DOWNLINK Packet Access

Please don't be offended, I am just offering up the correct term.

[jungleland]

Originally Posted by mblind

Many times when I make voice call.. I notice that my BB 7130c switches to GPRS.. I hang up.. and right back to EDGE.. It only does this with voice NOT data.. I am in a Major metro area with REALLY strong signal. any ideas?

that's fine...as long as i returns to EDGE after the call...EDGE is not capable of voice....

[Pizzle]

Originally Posted by jungleland

that's fine...as long as i returns to EDGE after the call...EDGE is not capable of voice....

Uh...Since when is EDGE not capable of voice?