[MrNotorious]

7. Now go to AT&T BIS Page log in and resend your service books.

So my blackberry storm has already been registered at this site...
any way around this?

probably not... I'm guessing

[JSanders]

Details will help.

You bought a used Storm? The PIN is registered in Verizon and not released?

Ask the seller to call VZW and ask them to release the PIN.

[MrNotorious]

I went to the page where you enter your IMEI and you PIN and I filled out the form and it came up with a window saying that the device with that pin and IMEI has already been registered.

I do know that the the guy I bought it from had used it on ATT.
I guess that I'll have to talk to him and see if he can call them.

[dylokjai]

i pass step 7 but stuck here

But I don't have the info in step 8. "On your Storm go to Option > Advanced Options > TCP/APN should say
APN: wap.cingular
Username:WAP@CINGULARGPRS.COM
Password: CINGULAR1"

What I have is :TCP/APN
APN: emgsm.bzw3g.com
Username:
Password:


Also there is no browser present.

I have no browser and no email setup

[Sc00ter2k]

i know im a noob at blackberry but i dont get a) Install your current OS on your BlackBerry device to your PC.
If you are using a beta OS, it must be installed on the PC. Find the most current OS release

[JSanders]

Originally Posted by dylokjai

i pass step 7 but stuck here

But I don't have the info in step 8. "On your Storm go to Option > Advanced Options > TCP/APN should say
APN: wap.cingular
Username:WAP@CINGULARGPRS.COM
Password: CINGULAR1"

What I have is :TCP/APN
APN: emgsm.bzw3g.com
Username:
Password:


Also there is no browser present.

I have no browser and no email setup

Enter the APN as stated in the instructions. Yes, yours will have the "emgsm..." and needs to be changed per the instructions.

And, until you do this, and complete the instructions, you won't have the browser or email setup icon. Correct. That is why you must complete the instructions.

[JSanders]

Originally Posted by Sc00ter2k

i know im a noob at blackberry but i dont get a) Install your current OS on your BlackBerry device to your PC.
If you are using a beta OS, it must be installed on the PC. Find the most current OS release

Scooter, look at your device > Options > About, third line down beginning with "v4.7xxx", that is your Operating System on your device.

Now, that OS must be installed to your PC, so find that OS from your carrier, download and install it.

[tekki31]

I just unlocked my BB 9530 and inserted my T-Mobile SIM which is on a corporate BES account and I was able to browse the Web, the service books seem to have come down on it's own..I have the WAP and Broweser icons tested and works.

[ncseahawk]

C:\ProgramFiles\CommonFiles\ResearchInMotion\Share d\LoaderFiles\OS version\Java.

Jason,

My C:\ProgramFiles\CommonFiles\ResearchInMotion
does not have a Share d\LoaderFiles\OSversion\Java.

Any ideas.

[ncseahawk]

BTW...it is an updated Microsoft Vista OS

[Ironman1075]

JSanders, since i c you are online, question for you. I have the Storm on AT&T with .148 OS the only way I can keep EDGE at all times is by not setting he APN (i have it unchecked). Is there any issues if I don;t have it.

I can get to all my websites no problem and i get all my emails. Thanks

[JSanders]

That is no problem. You might run across a third party application like JiveTalk or Pandora radio that wants to access the TCP/APN ports for data, and if you encounter a problem, you'll know what you need to enable.

[Ironman1075]

i can live with that. Thanks!!!!!!!!!!!!!!!!!

[khien]

Originally Posted by ncseahawk

C:\ProgramFiles\CommonFiles\ResearchInMotion\Share d\LoaderFiles\OS version\Java.

Jason,

My C:\ProgramFiles\CommonFiles\ResearchInMotion
does not have a Share d\LoaderFiles\OSversion\Java.

Any ideas.

I has the same problems, and I reinstalled OS agian without unsintalled & shared folder came up.

good luck

[Maverick2407]

I have an Unlocked Verizon Storm that is not showing the MMS icon for messaging. I have everything else working but no MMS. Does anyone have any suggestions on what to try?

[JSanders]

You'll need the Service Book from ATT for the MMS transport client.

Have you followed all the directions above?

[ghostshell]

Discovered by JSanders,

My experience (and I've had quite a bit with this same AT&T "EDGE" issue) is that after the OS install or a battery pull reboot, if you go to Manage Connections > Mobile Network Options > and set the Network Mode to 2G only (not 3G and & 2G which is the default setting) you will hold EDGE solid.

After making that change to 3G only, you must return to Manage Connections > Mobile Network, an UNcheck, let the signal go off, and reenable it a minute later to catch full EDGE, sometimes 3-4x doing that may be needed.

And yes, the hybrid OS with the radio code from .90 or another OS does work well too.

Note: I'm running .148 OS, .132 radio, diabled TCP/IP settings and did the above and i have been checking randomly and watching and im solid EDGE at this moment, just checked again and watched till the screen dimmed.

[Supertwins]

I am following the steps to load the browser on my newly unlocked Storm for ATT and when I get to Shared it still shows my curve instead of OS. If I click my curve it goes to Java as described in the instructions but when opening up the DS remove APPS the browser is not in bold it is lightly shaded-if I right click it will show me the cod file I need to delete but I cant delete it that way. HELP!!!!

[JSanders]

Supertwins, I don't understand your first sentence... "shows your curve instead of OS. If I click my curve it goes to Java..."

Help with details.

[Supertwins]

2. On the PC, go to C:\ProgramFiles\CommonFiles\ResearchInMotion\Share d\LoaderFiles\OS version\Java.
Create a new folder and name is ATT. Find the .cod named net_rim_bb_browser_dameon and move the cod to your new folder.

Instead of showing OS version it shows my 8310(curve that I had)

This is where I'm getting hung up.....

Thanks for all the support....