[williamxi]

EasyDialer 1.5 is available

It supports auto-dialing extension number after destination number, and generates very neat call logs.

It allows to dial very long dial sequence by dialing calling card after service phone call is connected.

It fixes a bug in international prefix matching.

William

EasyDialer - Fast, Accurate! Relieves the pain of dialing lengthy numbers.
----------------------------------
If you love it, please let friends know.
If you hate it, please let us know.

[waiho]

ver1.4 works perfectly. However, tried to updated to 1.5.

I take it do not need to remove the existing ver1.4 and just install 1.5 which is the latest ver.

After installation, reboot require.

Rebooted, and "app error 200".

I'm not sure do i need to remove the Ver1.4 first then only run the clean install again for Ver.1.5

Havent try yet. Due to "app error 200" occur on my device when i was running the first installation without removing the previous ver.1.4 and took me about 2 hours to fix my device with JL Commander.

Tried loader.exe and removed the easydialer still appearing "app error 200" after rebooted.

Originally Posted by williamxi

EasyDialer 1.5 is available

It supports auto-dialing extension number after destination number, and generates very neat call logs.

It allows to dial very long dial sequence by dialing calling card after service phone call is connected.

It fixes a bug in international prefix matching.

William

EasyDialer - Fast, Accurate! Relieves the pain of dialing lengthy numbers.
----------------------------------
If you love it, please let friends know.
If you hate it, please let us know.

[waiho]

Hi William,
After running few test, I finally figure out why i'm getting the "app error 200".
I reckon is Firmware ver that i use was not really stable after many software that i have installed and remove on my device.

What i done is wipe my device and start from a clean OS and installed V1.4 and upgrade to V1.5 and is all work fine.

Sorry it was my mistake.

Tested all feature and work perfect on V1.5


Good App!

[williamxi]

Hi Waiho,

Thanks a lot for figuring out the problem! I feel so sorry that the app error 200 happened on your device.

Since 1.5 release, I've seen many downloads and activations. I believe many of them are upgrading from 1.4 to 1.5. I didn't get any error report besides yours.

I appreciate you very much for testing 1.5 as well. It identifies a small bug in call log handling.

Cheers,
William

[williamxi]

Anyone is always welcome here to ask questions, advise new features, suggest improvement, or share your usage experience.

William

EasyDialer - Fast, Accurate! Relieves the pain of dialing lengthy numbers.
----------------------------------
If you love it, please let friends know.
If you hate it, please let us know.

[rboy]

i don't notice any changes when i downloaded 1.5.

[williamxi]

hi rboy,

Below are comparisons between EasyDialer 1.4 and 1.5

Suppose there is a dialing card:

service#: 1234567

And suppose there is a contact "John", its number: 555-5555W111 (W means wait, 111 is extension number).

In EasyDialer 1.4, which doesn't support dialing extension# and neat call log, the result is:

1. When service number is connected, 555-5555W111 is dialed. The service provider may either consider it an invalid number, or extension 111 is dialed before destination number is connected. You may have to manually dial extension number, even have to change your contact number in address book.

2. When call is finished, a call log shows you called calling card service number 1234567.

In EasyDialer 1.5, the result is:

1. When service number is connected, 555-5555 is dialed first. When destination# is connected, a dialog pops up to ask you to continue dialing extension number.

2. When call is finished, a call log shows you called "John", rather than service number. You can re-dial the contact from call log screen.

I believe these improvements are very helpful.

William

[kylet]

Hi William

I downloaded your EasyDialer application today from AppWorld (as your callingcardDialer.com seems to be down)

I've been able to set it up to dial the Bell Canada access 1-800 number, the language preference (1 for english), the calling card number and PIN, and finally the contact phone number.

The problem is my Rogers bill will only show the Bell Canada access 1-800 number as who I dialed, and I require it to show the number of who I was calling.

Is there any way to setup my Bold, using your EasyDialer, so that it will dial 0, the contact phone number, then wait (or pauses) until the Bell Canada computer asks for the language (1 for english) then call type (7 for calling card), and finally the calling card number and PIN? This way my Rogers bill would show the actual number dialed, and that it was calling card call.

Thanks!

[williamxi]

Hi Kylet,

Could you try to add a calling card with below settings? I'm not very sure if it works.

Calling card type: Direct call
Uncheck "Support long dialing sequence"
service number: 0
dial sequence before destination#: empty
dial sequence after destination#: P1P7Pcalling card number and PIN.
international prefix: anything Bell requires

[williamxi]

New feature since EasyDialer 2.0:

Smart Dial -- interpret any outgoing calls based on configurable rules.
Menu click to dial is not required, but kept as an option.

Smart Dial allows you to set rules for interpreting outgoing calls. Rules are checked by its order. Once a rule is matched, the rule action is taken. For "Dial" action, EasyDialer drops current call, then dials the assigned calling card; for "Don't Dial" action, current call is allowed going through.

Below are some rules:

* Don't dial if destination number starts with 1416,416, 1800,800
(Don't dial with calling card for local or toll-free numbers.)
* Dial calling card [international cheap call] for any number starts with 011
* Dial calling card [Google Voice] for any outgoing call.

Bug fixes:

- Fix bug in phone# matching that causes voice callback doesn't work in some cases.

Other good features since 1.5:
- Supports auto-dialing extension number
- Very neat call logs. log shows destination#, rather than calling card access#.
- Support dialing very long dial sequence.

William

EasyDialer - Fast, Accurate! Relieves the pain of dialing lengthy numbers.
----------------------------------
If you love it, please let friends know.
If you hate it, please let us know.

[funkym]

This whole thread looks like a spam/self-promoting thread to get people interested in a program that copies someone else's program idea.

It might be legal in some countries (as we know Canada has been placed on the global copyright blacklist) but from the moral point of view, it is doubtful. At least in my opinion...

Sorry, for dropping my 2 cents in here.

[williamxi]

Originally Posted by funkym

This whole thread looks like a spam/self-promoting thread to get people interested in a program that copies someone else's program idea.

It might be legal in some countries (as we know Canada has been placed on the global copyright blacklist) but from the moral point of view, it is doubtful. At least in my opinion...

Sorry, for dropping my 2 cents in here.

Hi funkym, I checked out all messages you've posted regarding all kinds of dialer apps. Definitely you are a BerryDialer promoter! I don't mind you to promote anything, but please be nice to your competitors!

It's so weird that you talked about copying idea is legal or not in this thread. Smart Dial is not a feature of BerryDialer. Besides, idea copy triggers competition, and competition always benefits users!

I know somebody who tried BerryDialer, it's sold at $29.99 in Handango. And it has so many limitations in either dialing from phone pad, or dialing calling card after destination number. This let me thinking to write a new dialer...

Now EasyDialer has upgraded to 2.0, its functions are much better than BerryDialer. Before your thumb down, have you tried it?

I'm keen on improving EasyDialer rather than "thumb down" competitor's product. You please stay away from this thread.

At last, great appreciation to BlackBerry Forum which provides me the place to discuss my app. So I save a lot of work to do it on my website.

[funkym]

Of course, I was expecting your reply being exactly this.

Like they say in Asia man: it is better to make a good copy rather than creating a bad innovation... or so.

I am out of this thread, won't reply anymore. So no worries, no more thumbs down for you

[x14]

Gave 2.0 a try on 8800 4.5.0.110. Seems a little buggy.

When direct calling the service number 555-123-4567. Sometime is dials dorrectly sometime is dials as +5551234567.

The pause doesn't seem to work in the "Dial Sequence before destination#:"

[williamxi]

Hi x14,

Please send email to , you will be helped to find reason.

[williamxi]

I got many positive feedback about EasyDialer 2.0. While there is bad news too.

Please note that Easy 2.0 includes all 1.5 features. You can always use "Call with EasyDialer" to place a call.

Below are problems found:

Smart Dial is found not working on some OS 4.5 Curve. The reason is found that EasyDialer phone listener is not notified by OS when an outgoing call is placed, therefore it cannot apply the rules for Smart Dial. I'm investigating any work around.

Another bug found is that callback that worked in EasyDialer 1.5 may not work in 2.0. When callback call comes in, the destination# is not dialed. The most possible reason is that the incoming call's number is different from the service number in the calling card. You may try to add or remove country code in the service# in the calling card. Once the expected incoming call number matches the received incoming call number, the destination # is dialed.

[williamxi]

EasyDialer is updated to 2.1.

- Fixed bugs found in 2.0
- Support dialing conference call code, dynamic or static

[waiho]

Originally Posted by williamxi

EasyDialer is updated to 2.1.

- Fixed bugs found in 2.0
- Support dialing conference call code, dynamic or static

Nice one! Its getting better!! Keep it up

[bbkingrocks]

Version 2.2 has been released. Seems to be working pretty well. Great with GV and the Smart Dialing is a great feature. William is extremely responsive to any questions or comments via email.

[x14]

Be aware the update removes any calling cards you may have.