View Single Post
Old 04-13-2014, 06:01 PM   #4
tsac
BlackBerry God
 
tsac's Avatar
 
Join Date: Mar 2005
Location: Others run out when we run in
Model: Z10
OS: Cheerios
PIN: No Pin just a Tack
Carrier: at&t
Posts: 10,030
Default Re: Blackberry z10 10.2.1.2102 battery issues

Hate to disagree but the link you included offered this which is what most have reported in some form or another.

Over-discharging Lithium-ion

Li-ion should never be discharged too low, and there are several safeguards to prevent this from happening. The equipment cuts off when the battery discharges to about 3.0V/cell, stopping the current flow. If the discharge continues to about 2.70V/cell or lower, the battery’s protection circuit puts the battery into a sleep mode. This renders the pack unserviceable and a recharge with most chargers is not possible. To prevent a battery from falling asleep, apply a partial charge before a long storage period.

Battery manufacturers ship batteries with a 40 percent charge. The low charge state reduces aging-related stress while allowing some self-discharge during storage. To minimize the current flow for the protection circuit before the battery is sold, advanced Li-ion packs feature a sleep mode that disables the protection circuit until activated by a brief charge or discharge. Once engaged, the battery remains operational and the on state can no longer be switched back to the standby mode.

Do not recharge lithium-ion if a cell has stayed at or below 1.5V for more than a week. Copper shunts may have formed inside the cells that can lead to a partial or total electrical short. If recharged, the cells might become unstable, causing excessive heat or showing other anomalies. Li-ion packs that have been under stress are more sensitive to mechanical abuse, such as vibration, dropping and exposure to heat.
__________________
Z10 on BES
Z10 on BIS
Offline   Reply With Quote