U.S. Solid 15KW High Frequency Induction Heater Furnace 220V, 16:1 Turns Ratio For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
U.S. Solid 15KW High Frequency Induction Heater Furnace 220V, 16:1 Turns Ratio:
$1201.09
FEATURES
- Adopts the latest MOSPET, IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power.
- Power consumption is half of traditional electron tube high frequency induction heating equipment under same conditions.
- With 100% load design, can work in 24 hours without stop. Infrared temperature detector can be equipped to realize the automatic control of temperature, improve heating quality and simplify manual operation.
- With heating-insulating-cooling three stages function setting, the heating and insulating time required can be get to accommodate to the batched and repeated heating situations.
- With multiple status display of overflow, over voltage, low water, phase failure and load malfunction, providing higher reliability and sustainability.
- Select power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
- INTRODUCTION VIDEO, OPERATION VIDEO.
- Make Everything's SOLIDModelUSS-HFIH00001-220VMax. Inductive Power15 KWMax. Input Power7 KWTurns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary)16:1Input VoltageSingle Phase; 220 VOutput Current200-600 AMin. Water Temperature26 ℃ (78.8 ℉)Max. Heating Temperature1200 ℃ (2192 ℉)Fluctuating Frequency30-80 KHzTime Settings01 to 99 secondsWater Temperature Protection Point40 ℃ (104 ℉)Flow Rate of Cooling Water≥ 7.5 L/minMin. Water Pressure0.3 MPaHead of Cooling Water≥ 30 m (98 ft)Min. Wire Gauge9 gaugeCircuit Breaker≥ 40 ANet Weight25 kg (55 lbs)Product Dimensions22" x 9" x 19"Accessories on saleM8 Screw6mm Copper Pipe8mm Copper PipeTig Water Cooler
This machine can't be used with a plug, it need a wire to connect the machine to power line directly (The cross-sectional area of power line must be larger than 6 square milimeters).
The water temperature must not be lower than 26℃ to prevent a large temperature difference from the ambient temperature, which will cause condensation on the water pipes to form water droplets.
PACKING LISTS
- 1 x LH-15A Induction heater
- 1 x Foot pedal
- 3 x Fuse
- 4 x Stainless steel clamp
- 2 x Copper tubing to connect your own coil (about 0.5 ft long)
- 1 x Copper tubing to creat your own coil (about 5 ft long)
- 1 x Copper coil (about 3.3 ft long)
- 1 x Rubber hose (about 32 ft long, 3/4" diameter)
We can also make customized heating coil, the shape and diameter is determined by the workpiece you will process. If you make customized heating coil, please tell us the detail workpiece Hybrid welding of different materials. Clean the surfaces to be used. Dimension of the workpiece should be less than 1.2" x 1.2" x 1.2".
- Diathermy: The diameter of the workpiece should be less than 5 mm (3/16").
- Sealing: This can be used to seal and cap different machines. Be aware of the metal type used in the seal.
- Hardening: Many metals can be heat-treated to induce hardening. Most often, this process requires quenching right after heating, so have a quenching station available.
- Annealing: Some heat-treated metals will end up softer. Be aware of the type of metal you are heat-treating; results can differ.
- Soldering: Much like brazing, clean the surfaces to be used. Be aware that solder can melt very quickly.
- Smelting: Many metals can be smelt, e.g., copper, silver, and gold.
- All orders will ship from within 5 business days of payment. Delivery may be delayed due to carrier delays and/or other issues.
- All of our customers are very important to us, if you have a delivery or quality problem, please do not open a case but contact us promptly via message, we will try our best to resolve it with you.
- Returns are accepted within 30 days of the buyer receiving the item. Buyer is responsible for return shipping if it's not our fault. We will issue a refund within 2 business days of receiving the returned item.
- Returned items must be in their original condition, custom items cannot be returned.
MORE Inductive Power15 KW25 KW/Max. Input Power7 KW16 KW6 KWOutput Current200-600 A200-1400 A5-30 ATurns Ratio16:116:218:118:2/Input VoltageSingle Phase; 110 VSingle Phase; 220 VSingle Phase; 110 VSingle Phase; 220 VThree Phase; 480 V180-245 VDescriptionThe length of the coil that can be heated is about 1 meter, which is used to heat relatively small metal parts. It will be faster if the outer diameter of the workpiece is less than 30mm.The length of the coil that can be heated reaches 2-2.8 meters, which can be used to smelt 2kg copper.The length of the coil that can be heated is about 1 meter, which is used to heat relatively small metal parts. It will be faster if the outer diameter of the workpiece is less than 30mm. The heating speed of USS-HFIH00003 is twice that of USS-HFIH00001.The length of the coil that can be heated reaches 2-2.8 meters, which can be used to smelt 2kg copper. The heating speed of USS-HFIH00012 is twice that of USS-HFIH00011.Used for heating workpieces with an outer diameter less than 12mm or quenching．
SHIPPING
RETURN POLICY
Related Items:
U.S. Solid 1mg Analytical Balance 0.001g Lab Digital Precision Scale 100g-500g
$192.09
U.S. Solid 500gx0.001g Lab Analytical Balance 1mg Digital Precision Scale
$98.29
U.S. Solid 220g x 0.0001g Analytical Balance with Automatic Internal Calibration
$519.29
