TekBox TBOH01 - 5uH DC Line Impedance Stabilization Network LISN For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TekBox TBOH01 - 5uH DC Line Impedance Stabilization Network LISN:
TekBox TBOH01 5uH DC Line Impedance Stabilization Network LISN
The TBOH01 5 uH Line Stabilization Network (LISN) is used for pre-compliance testing of DC powered products.Avoid expensive repeat visits to the EMI test lab by doing some of the tests before you go. Pre-compliance testinggives you confidence in how your product will perform at the test lab.
The TBOH01 5uH LISN is used to perform conducted noise measurements of DC-powered devices.The LISN is inserted between the power supply and the DUT (Device Under Test). Conducted noise generated by the DUT can be measured at the BNC connector using a spectrum analyzer or a measurement receiver.SPECIFICATIONSTBOH01 5uH DC Line Impedance Stabilization Network LISNFrequency range: 100kHz - 110MHzDC Resistance: 40 m OhmsMaximum current: 10ANominal operating voltage range: 0 – 75V DC;Absolute maximum rating: 200VBuilt in surge protection
TekBox TBOH01 - 5uH DC Line Impedance Stabilisation Network LISN