Single Phase Digital Panel Voltmeter Ammeter 220V 100A Voltage Current Energy For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Single Phase Digital Panel Voltmeter Ammeter 220V 100A Voltage Current Energy:
$17.72
Images show Description Item Description: - Power Supply: AC
- DIY Supplies: Electrical
- Material: Plastic + Metal
- Display Type: Digital Only
- Measurable Current Range: 0 - 100A
- Measurable Voltage Range: 80 - 260V
- Operating Temperature: -10 ~ +65 ℃
- Features:
- Reset energy function.
- Electrical parameter measurement function. (voltage, current, active power, energy)
- Whole viewing angle LCD. (display voltage, current, active power/energy at the same time)
- Power alarm threshold preset function. (can set power alarm threshold)
- Backlight function.
- Store data when power off.
- Overload alarm function. (over power alarm threshold, backlight and power flashing to alarm) - Rated Power: 10A/22000W
- Operating Frequency: 45-65Hz
- Measurement Accuracy: 1.0 grade
- Display format:
Power: test range: 0~22kW within 1KW, the display format is 0.0~999.9W1KW and above, the display format is 1000~9999W;10kw and above, the display format is 10.0~22.0kW.
Energy: test range: 0~9999kWhWithin 10KWh, the display format is 0~9999Wh10kWh and above, the display format is 10~9999kWh;Over 9999kwh will return 0.
Voltage: test range: 80~260VDisplay format: 80~260V.
Current: test range: 0~100ADisplay format: 0.00~99.99A. - Key:
Backlight control:
- Short press the light button to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
Reset energy:
- Step1: Long press the Setting button 6 for at least 3 seconds until the number in energy display area flash, then release the key. - Step2: If short press the Setting button again, then the energy value is cleared and exit the reset state. If short press the light button again, then the energy value will not be cleared and will exit the reset state. If there is no operation on the key within 10 seconds, the energy value will not be cleared and will exit the reset state.Set power alarm threshold: - You can short press the Setting button to switch display the power/ energy, the display state will be store when power off.
- Active power is calculated as: P = U * I * cosφ, cosφ represents the power factor, for purely resistive loads (such as incandescent, heater, etc.) the power factor is generally close to 1, for inductive load and capacitive load, the power factor is between 0-1; so when you test the purely resistive load, the power (P)is substantially equal to or close to U * I; but when you test inductive or capacitive loads (such as refrigerators, washing machines, televisions, computers, etc.), P
Related Items:
2HP 220V 1.5KW Variable Frequency Drive Inverter VFD Single to 3 Phase Output
$68.99
Variable Frequency Driver 5HP 220V 4KW Interver VFD Single to 3 Phase Output
$136.59
For NEW schneider ATV320U11M2C frequency converter Single phase 220V, 1.1kW
$302.00
- Step1: Long press the light button at least 3 seconds until the number in power display area flash, then release the key
- Step2: Power area display the current power alarm value and the last digit begin to flash, then you can short press the Setting button to plus 1, short press the light button can switch the digit which you want to set. The threshold can’t be over 2.5kw (note: the default value is 2.5kw).
- Step3: After finish the setting, long press the light button over 3 seconds or there is no operation over 10 seconds, it will store data automatically and exit the set state.
4.Power/Energy switch.
