Pressure transducer/sender, -14.5-500 psi, stainless steel,for oil,fuel,air,wate For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Pressure transducer/sender, -14.5-500 psi, stainless steel,for oil,fuel,air,wate:
$18.14
Description:
·Brand new vacuum pressure transducer. Stainless steel body.
·Input: -14.5 psi (-1.0 bars) to 30 psi (2.0 bars).
·Output: 0.5V -4.5V linear voltage output.
·Works for boost vacuum chamber, oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 0.5% of reading (full scale).
·Thread: 1/8” 27 NPT.
·Wiring connector: water sealed quick disconnect. Mating connector is included.
·Wiring: Red: +5V; Black: ground; Green: signal output;
·It is an advance pressure sender than traditional mechanical pressure sender.
·Our material is using top of line 316 stainless steel and high temperature auto-graded plastic.
·Brand new pressure transducer. 316 Stainless steel />·Stainless steel body.
·100% brand new and high quality,Durable.
·Installation instructions not included, Tool not included.
·Input: 0-100 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Accuracy: within 1.5% of reading (full scale).
·Burst (over or max pressure) pressure: minimum 200 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
·It is an advance pressure sender than traditional mechanical pressure sender.
Package includes:
1 * Pressure transducer />·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-150 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Accuracy: within 1.5% of reading (full scale).
·Burst (over or max pressure) pressure: minimum 300 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
·It is an advance pressure sender than traditional mechanical pressure sender.
Package includes:
1 * Pressure transducer />·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-300 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Burst (over or max pressure) pressure: minimum 600 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 1.5% of reading (full scale).
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer />·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-15 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 7.5 psi outputs 2.5V, 15 psi outputs 4.5V.
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 1.5% of reading (full scale).
·Current draw: less than 4 mA.
·Burst (over or max pressure) pressure: minimum 100 psi.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer Stainless steel body.· 100% brand new and high quality,Durable.· Installation instructions not included, Tool not included.· Input: 0-150 psi.· Power: 12V (10V-25V wide power range).· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.· Accuracy: within 1.5% of reading (full scale).· Current draw: less than 4 mA.· Burst (over or max pressure) pressure: minimum 300 psi.· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.· Wiring: Red for +12V. Black for ground. Blue for signal output.· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.· This is a high quality pressure sender, with ceramic pressure chip sensor inside.Package includes:1 * Pressure Stainless steel body.· 100% brand new and high quality,Durable.· Installation instructions not included, Tool not included.· Input: 0-100 psi.· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.· Accuracy: within 1.5% of reading (full scale).· Thread: 1/8”-27 NPT.· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.· Wiring: Red for +12V. Black for ground. Blue for signal output.· It is an advance pressure sender than traditional mechanical pressure sender.· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.Package includes:1 * Pressure />
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-200 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 400 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
80psi/5V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-80 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 40 psi outputs 2.5V, 80 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 200 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
500psi/12V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-500 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 250 psi outputs 2.5V, 500 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 1000 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
300psi/12V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-300 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 600 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +12V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
2500psi/5V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-2500 psi.
· Power: +5V tp 12V range, it takes wide range.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 1250 psi outputs 2.5V, 2500 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 3000 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer Payment Delivery details Terms of sales About us Contact us Payment We accept payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer\'s responsibility. Delivery details Shipping:The item will be shipped from our US warehouse to United States, which is more faster than from aboard.2-9 working days to: USA Terms of sales
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Related Items:
1/8NPT 150 Psi Pressure Transducer Sender For Oil Fuel Air Water Stainless Steel
$15.98
(Wi-Fi) Pressure Transducer Sender Stainless Steel 1/8NPT Oil Fuel Air Water
$39.00
0-5psi Linear 0.5-4.5V Gas Fuel Air Liquid Pressure Sensor Transducer Sender
$17.22
