Ortur Laser Engraver Engraving Machine Laser Master 2 Pro S2 20W DIY Wood Cutter For Sale

Ortur Laser Engraver Engraving Machine Laser Master 2 Pro S2 20W DIY Wood Cutter


Buy Now

Ortur Laser Engraver Engraving Machine Laser Master 2 Pro S2 20W DIY Wood Cutter:
$489.99

2021 Ortur Laser Master 2 Pro S2 Laser Engraver 10000mm/min DIY Engraving Machine 20w cnc Wood CutterItem DescriptionMain Features:
  • 【Ortur Laser Master 2 pro S2-SF model】Laser Master 2 Pro S2-SF, adding new functions such as flame detection, emergency stop, etc., with stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. brings users a better experience!

  • 【Overall optimization】 Laser Master 2 Pro S2-SF has a longer service life, because the mechanical structure has been optimized and designed to have a faster speed and can work stably for a long time. At the same time, Ortur Laser Master 2 Pro S2 can provide users with more security because it has more security features.

  • 【Accessories system update]】1. Because it is equipped with the latest OLM-PRO S2 -V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.5 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen.

  • 【Product advantage】Ortur Laser 1.8 firmware, qualified for ESP32 MCU, optimizes the motion algorithm, and increases the maximum stepper motors speed from 4000mm/min to 10000mm/mm. The focus of the LU2-4 laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.08 * 0.15 mm, and the focal area is about a quarter of the first-generation 0.23 * 0.23 mm. So he can cut through 3mm plywood and 6mm pine board at a time.

  • 【Safety protection】 1. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser; 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. 3. The engraving machine is turned on, but there is no movement for a long time, it will be protected, and the laser will be turned off automatically. 4. Flame Detector + Buzzer

Specification:

Motherboard: OLM-MAXUP-V10 Motherboard, with 32Bits MCU
Firmware: OLF-V1.5 Firmware
Safety Precautions: 1. Active Position Protection; 2. Exposure Duration Detection and Limitation; 3. Laser Beam Safety Guard; 4. Flame Detector; 5. Emergency Stop Button
Frame Materials: Aluminum + Powder Coated Steel
Motors: NEMA 17 Stepper Motors
Mechanical Precision: Y:12.5um,X:12.5um
Pixel Accuracy: Adjustable (Default: 300 pixels per inch, about 0.81um Pixel Accuracy)
Engraving Area: 400mm*400mm
Available Laser Modules: LU2-4 (2nd Generation FAC , Luminous Power: 4,500-5,000mw)
Wave Length: 445±5nm
Focus: Fixed Focus
Default Focal Length: 50mm (from the heat sink to the object)
Control Mode: PWM
Power Rate: S0-S1,000
Engraving Speed: 0-10,000MM/Min
Baud Rate: 115200 - 921600 (Default: 115200)
Computer OS: Win XP, Win 7, Win 8, Win 10 (LaserGRBL); Mac and Linux (LightBurn)
Control Softwares: LaserGRBL (free), LightBurn (Paid Software)
Input Format: JPG, JPEG, PNG, BMP, SVG, etc.
Available Materials of Engraving: Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.
Available Materials of Cutting: Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.
Input Voltage: 110V-220V (Compatible)
Power Adapter Output: 24V/2A
Operating Temp.: -20℃-50℃​

Note:

  1. When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.
  2. Do NOT operate laser without eye protection (Laser goggles).
  3. Please set up laser engraver in the fireproofing area, with good ventilation.
  4. Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection.
  5. Please avoid strongly impact on the machine.
  6. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
  7. Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.
  8. Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows.
  9. While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.






Buy Now

Related Items:

ORTUR Laser Master 2 Pro S2 Laser Engraver 32Bits Wood Carving Engraving Machine picture

ORTUR Laser Master 2 Pro S2 Laser Engraver 32Bits Wood Carving Engraving Machine

$349.99



Ortur Laser Master 2 Enclosure Protective Metal Cover for Engraving Cutting Tool picture

Ortur Laser Master 2 Enclosure Protective Metal Cover for Engraving Cutting Tool

$319.99



Ortur Z-Height Adjuster Adjustment Z Axis Lift Device for Laser Master 2 Pro S2 picture

Ortur Z-Height Adjuster Adjustment Z Axis Lift Device for Laser Master 2 Pro S2

$57.99



Popular Forums