New GY-MAX4466 Electret Microphone Amplifier with Adjustable Gain for Arduino For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New GY-MAX4466 Electret Microphone Amplifier with Adjustable Gain for Arduino:
$0.99
Product Details
Description:Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn\'t nearly as noisy or scratchy as other mic amp breakouts we\'ve tried!
This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That\'s down to be about 200mVpp (for normal speaking volume about 6\" away) which is good for attaching to something that expects \'line level\' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!
Using it is simple:
connect GND to ground, VCC to 2.4-5VDC.
For the best performance, use the \"quietest\" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you\'re using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you\'re connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.
The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you\'ll need an audio amplifier (such as 3.7W stereo amp) if you want to connect the amp directly to speakers. If you\'re connecting to a microcontroller pin, you don\'t need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.
For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and \'translate\' it into frequencies.
Package Included:1 X Electret Microphone Amplifier MAX4466 withAdjustable Gain for Arduino
- Payment Method
- Shipping Policy
- Returns & Refund Method
- Managed Payment. But we only Accept your Address, please Make sure it\'s 100% right.
- Payment must be received in 5 business days of sale closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
Returns & Refund Policy
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.
Related Items:
10Piece GY-MAX4466 Electret Microphone Amplifier+Adjustable Gain For Arduino USA
$17.99
1-10Piece GY-MAX4466 Electret Microphone Amplifier + Adjustable Gain For Arduino
$11.99
GY-MAX4466 electret microphone amplifier MAX4466 adjustable amplifier module USA
$2.12
