NEJE 3 PLUS N40630 desktop LASER ENGRAVER CUTTER wood acrylic plywood engravingFEATURE【Open operating platform】Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 338 dots/inch. The whole machine function test requires only 4 screws to complete the installation.【Widely engraving and cutting ability】The NEJE N40640 module has 7.5W pulse power and 0.08x0.08mm focus, 5.5W continuous output power, and has a wide range of engraving and cutting capabilities. It is a very cost-effective module. Suitable for hardwood, glass, rubber stamps, Grooves and image engraving of materials such as stone, usually also suitable for cutting 3-5mm plywood and other materials, (engraving and cutting of materials with greater hardness need to increase air assist).【More clearer, Safer】N40630's Simple and practical optical design, safety drive design, everything is for more powerful \ clear Engraving and safe use. The motherboard has built-in MEMS protection. When the device is working, the MEMS gyroscope will automatically record the device status to prevent accidental touch. The built-in light baffle can block 90% of the light, usually without wearing glasses, the N40630 module provides a very safe, easy-to-use and comprehensive entry-level product for engraving and cutting for engraving enthusiasts.【Portable professional control software】32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services.【Perfect after-sales service]】10 years of technical precipitation makes the NEJE team confident to provide a 2-year free after-sales commitment. NEJE is also the only laser engraving company that has direct factory after-sales and establishes a complete after-sales process.PRODUCT DETAILS
Hundreds of materials can be applied
The above are real works from NEJE fans. If you have any materials that you do not understand, you can contact our customer service.
10 years of laser technical precipitation
NEJE was established in 2013 and has accumulated millions of members, schools, small businesses, and personal DIY enthusiasts use NEJE equipment to create more possibilities every day.
Weak light and auto air assist in lightburn
NEJE optimizes GRBL firmware make the diode laser to have weak light in lightburn (GRBL mode) and adds automatic air assist and automatic smoke extraction system functions, eliminating tedious manual control.
Advanced mobile control system with OTA upgrade
Advanced 32-bit+BLE+MEMS new mobile control system, OTA software upgrade more functions and services.
NEJE optimizes the low-light experience in GRBL mode for diode lasers, and the low-light settings can be adjusted through the laserGRBL software.
Support repeated engraving, the position information will not be lost.
BLE-based wireless control, supports NEJE APP wireless control.
Built-in sensor protection, currently in NEJE mode, when the machine angle changes, the device will automatically stop working.
Wireless APP offline control
Wireless control function, turn on the phone, and complete a beautiful project in a few simple steps. The use efficiency is faster, and it does not take up the work computer.
The new NEJE V6.1.2 software supports area expansion, you can simply modify the length of the track to achieve area expansion, NEJE also provides the option of extended track.
The NEJE 3 control system has completed a very large upgrade, supporting OTA firmware and software upgrade services, NEJE has improved in the new GRBL firmware to adjust the low-light display under lighrburn and laserGRBL software and automatically control the air-assisted smoke extraction system.You can safely and stably upgrade to the latest GRBL firmware through NEJE software, When using the device for the first time, please open the NEJE software to update to the latest firmware.
NEJE 3 Max A40640 CNC Laser Engraving Machine Engraver CUTTER 12W & honeycomb
NEJE 3 PRO N40630 CNC laser engraver cutter engraving machine & honeycomb panel
NEJE 3 PRO E30130 laser engraving machine Laser engraver cutter & honeycomb 6W
NEW NEJE 3 Plus CNC Laser Engraver cutter Cutting engraving Machine 5.5W UPS
NEJE 3 PRO A30130 CNC laser cutter engraver machine 6W DIY Wood Leather Acrylic
NEJE 3 PRO A40630 Laser Engraver Cutter Marker Engraving Marking Machine 6W+