Intellitec Battery Guard 2000 Control Module 00-00660-120 For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Intellitec Battery Guard 2000 Control Module 00-00660-120:
$119.00
DescriptionIntellitec Battery Guard 2000 Control Module 00-00660-120
Intellitec’s Battery Guard 2000 saves your fleet
vehicles from becoming stranded and in need of
roadside service calls.
The Battery Guard 2000
Battery Guard 2000
Battery Guard
system prevents “dead”
vehicle batteries by disconnecting them before they
completely run down and cannot start the engine. This
second generation system is available in both 100 AMP
and 200AMP versions.
consists of three major
components. Intellitec’s patented latching relay (which
requires no power to maintain either open or closed
positions). The waterproof module, and the dash
mounted, LED, reset switch. The relay and potted
module are mounted near the battery, to disconnect it
from the vehicle’s electrical system. The reset switch is
mounted in a convenient location on the dash. The entire
system comes equipped with an interconnecting harness
to simplify the installation.
senses the battery voltage to determine
the amount of charge in the battery. When the voltage is
less than 12.0 volts for four minutes, the battery is then
automatically disconnected.
When the battery has been disconnected, it can be
conveniently reconnected by pressing the Battery Guard
Reset Switch. This switch is available in push-button or
rocker switch styles.
An LED indicator included in the reset switch will blink to
indicate the battery has been disconnected.
Low Voltage Sensing
Dash Mounted Reset Switch
Disconnect Indicator
Automatic Re-Connect
Ignition Override
System Test
LED Test
When the battery voltage rises above 13.3 volts, as with a
“jump start” or connection to a charger, the battery is
automatically reconnected.
When the ignition switch is in the ON position, the unit will
disconnect the battery, regardless of the voltage
level.
When the ignition is in the OFF position, press the dash
mounted Reset Switch for three seconds, this will
disconnect the battery, testing the disconnect system
function.
When the ignition is in the ON position, the LED in the
Reset Switch will illuminate
Related Items:
INTELLITEC 0100055000 Battery Disconnect Relay
$30.99
