GE FANUC Thermocouple Module 24/48VDC IC660BBA023RCC1 IC660TBA023CAM IC660BBA023 For Sale

GE FANUC Thermocouple Module 24/48VDC IC660BBA023RCC1 IC660TBA023CAM IC660BBA023
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

GE FANUC Thermocouple Module 24/48VDC IC660BBA023RCC1 IC660TBA023CAM IC660BBA023:
$399.00

TheIC660BBA023 is a thermocouple manufactured by GE Fanuc.IC660BBA023has a power supply voltage of 18-56 VDC at 9W, 10% max ripple.TheIC660BBA023 consists of a thermocouple input block with three isolated pairs of inputs. The system is configured with transformers to isolate power and optical couplers for appropriate signal isolation.

Factoring in sizing as an industrial utilization enhancer, theIC660BBA023 thermocouple has dimensions of 8.83” (22.44 cm) x 3.50” (8.89 cm) x 3.94” (10.00 cm). Weighing in at just 4 lbs. (1.8 kg), the unit is compact and suitable for many appropriate industrial requirements. Installation is easily facilitated with minimal impact on the operating units.

The IC660BBA023 block to block isolation is 1500 V for one minute, while the group to group isolation is at 300V. The IC660BBA023 block power supply system is designed with a power supply dropout time of 10mS minimum. Power system design facilitates the optimum power to weight ratio of the thermocouple, ensuring that operating power loads are kept to a minimum, while facilitating desired operating performance.

IC660BBA023 facilitates temperature change detection.IC660BBA023 has a voltage measurement of -25.0mV to +150 mV. Internal cold junction measurements of the IC660BBA023 facilitate an operating range of 0-60 C, while external cold junction measurement facilitates an operating range of -25.0C to +150.0C.

The IC660BBA023 input update time is a maximum of 3.0 seconds. System diagnostic configurations include Open Wire, Over Range, Under Range, High Alarm, Low Alarm, and Internal Fault.The IC660BBA023 circuit diagnostics are executed automatically for any active circuits in the system under assessment. During installation and system start up, systems can be configured to detect each of the aforementioned conditions. To a main system computer, these default configurations can be turned on or off, but with the IC660BBA023 connected handheld monitor, all faults will be reported. Inactive circuits will not be detected by the system.

The IC660BBA023 thermocouple can withstand storage temperatures of -40 C to 100C (-40F to +212F) and humidity of up to 95 non-condensing conditions. From a vibrational perspective, a rate of 5-10 HZ, 0.2” (5.08 mm) displacement, 10-200 Hz at 1 G vibration is allowed.


Technical SpecificationsRated Voltage:24/48 VDC# of Points:6Input Interface:J, K, T, E, B, R, S and N thermocouplesInput measurement:Adjusted up to +/-100 deg C or FOperating Voltage:18 - 56 VDCPoints per Common:3 groups of 2


Buy Now

Related Items:

NEW GE Fanuc IC693MDL940H Output Module picture

NEW GE Fanuc IC693MDL940H Output Module

$187.00



GE FANUC IC693CPU351 CPU MODULE IC693CPU351-GN  picture

GE FANUC IC693CPU351 CPU MODULE IC693CPU351-GN

$298.89



GE FANUC 44b398664-001 44B398847-002 44A398750-G01 CIRCUIT BOARD ***XLNT*** picture

GE FANUC 44b398664-001 44B398847-002 44A398750-G01 CIRCUIT BOARD ***XLNT***

$199.99



Popular Forums