When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
About the item:
【Connection way】Input:220VAC(+/-5%) 1 or 3phase(for single-phase input, just connect the input wire to the R and S terminals) Output:3phase 220v. Frequency:0-50hz/60hz. 0-400hz
【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting
【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
【Warranty】: Lifetime warranty .If there is an error code in the product and you do not know how to operate, please contact the seller.
How To Install This VFD
Symbol:Function Description
R.S.T:Input terminal of AC line power.(220V class for single phase, single phase connected to any two phases)
U.V.W:Output terminal of the inverter
E:Ground terminal: the third method of grounding for 220V.
Frequency 0.1%(-10~40℃); Analog: 0.1% (25±10℃)
Setting Resolution:Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency
Output Resolution:0.1Hz
Operator Setting Method:Press directly ←∧∨ to set.
Analog Setting Method:External Voltage Functions:Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
General Control
Ramp Control:Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
Torque Control:Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
Multi-Inputs:6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Multi-Outputs:5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
Other Functions:Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Protection Functions
Overload Protection:Electronic relay protection motor drive.Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.)
Fuse Protection:When the fuse breaks , the motor will stop.
Over-voltage 220V class:DC Voltage >400V.
Under-voltage 220V class:DC Voltage <200V.
Restart After Instant Stop:Restart with Frequency Track after Instant Stop
Stall Protection:Stall protection in ramp operation
Output Short Circuit:Electrical circuit protection
Other Functions:Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
Test parameters and methods:
1. Power connection mode,
If you use single-phase 220v, please connect to R and T, S is empty and do not need to be connected.
If you are three-phase 220v then connect to RST.
The three lines of the motor are connected to U,V and W.
2.Test Parameters
pn32=3
pn02= rated frequency of rated frequency of motor
pn12= rated frequency of motor
After the above Settings,
Press panel RUN to start and panel STOP to stop.
Press fwd/rev to switch forward and backward
Press the up and down buttons on the panel to adjust the speed
There are detailed menu instructions on page 8 of the manual
Note:The motor and frequency converter can only be connected by wire, and the switch cannot be installed in the middle
SpecificationWe have Two warehouses located in CA, and NJ, and the item will be shipped from one of them according to your location, and only to ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave note if the changes are needed before we send the product.
SHIPPING1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave note if the changes are needed before we send the product.
2. It is beyond our ability to change the address after we ship your item.
3. Orders placed at weekend will be shipped within 2 days.
4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days.
5. We only ship to the 48 states, and we do not ship to FPO or APO addresses.
We accept returns. Please contact our customer service team immediately if:1.You changed your mind and wish to request a return.
2.Your product was damaged during transit.
All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
We will require a picture of the damaged part for verification.
The buyer will be liable for the shipping costs associated with warranty claim.
For your peace of mind, this product comes with lifetime warranty. We value our customers and wish to make your purchase experience as enjoyable as possible. If something goes wrong with your product, please do not hesitate to contact us for assistance.
Please contact us through and include the original purchase information (i.e. your name , address, email and purchase receipt number).
We accept Paypal payment only.
Payment should be completed within 4 (Four) days of sale closing. Or unpaid dispute will be filed for closing sale.
7.5KW 10HP 220V Single To 3 Phase Variable Frequency Drive Inverter CNC VFD VSD
$164.90
7.5KW 10HP 220V Variable Frequency Drive Inverter Single To 3 Phase CNC VFD VSD
$164.90
VEVOR 7.5KW 10HP Variable Frequency Drive VFD for 3-Phase Motor Speed Control
$165.99
Popular Forums