10p Pin Header DSTIKE WiFi Deauther Monster V6 ESP8266 Development Motherboard For Sale
This item has been shown 54 times.
10p Pin Header DSTIKE WiFi Deauther Monster V6 ESP8266 Development Motherboard:
Although it is pre-flashed I still suggest you follow instructions to reflash the newest software once. Because software keeps updating all the time. This product does not include 18650 battery. Hardware has RTC inside but time function is not avaliable in the exist software. Please wait update.
Compare to V5:
Charging current increased to 1A
Added Highlight LED controled by GPIO16
Added RTC DS3231
What is it?
This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software.
With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit:
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and Hardware info
Display: SH1106 1.3" OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
Highlight LED: GPIO 16
RTC: DS3231 (RTC only work when you connect battery and now the pre-flashed deauther software does not use this)
Why did you make it
I designed this development board specially for Spacehuhn's great project:ESP8266 Deauther
It has been authorized by him and is officially supported.
Thanks to every customer that leaves response! I will keep improving this board.
What makes it special
Only 80~100mA power usage
Up to 35h of battery life with a 3500mAh 18650 cell
Charging current: 1A
Included 8dB antenna
Included 2 acrylic case
7 GPIO breakouts and 3.3 and 5V output
4 LEDs to indicate battery status in real time
Power button: Click to turn on, double click to turn off
Protection: short, over charging, over discharging, temperature, polarity
Added RTC DS3231
Added Highlight LED controlled by GPIO16
Use it only for testing and educational purposes against your own devices!
I don't take responsibility for what you do with it.
Please check the legal regulations for your country to make sure you don't violate any laws.
-1 x WiFi Deauther OLED V6
-1 x 10p Pin Header
-1 x 8db Antenna
-8 x Screw
-1 Set of Support
-2 x Arcylic Case
-1 x Battery Connector
-1 x Battery Wire
Payment Delivery details Return About us Contact us
● We accept Payment via PayPal only.
● If you do not have a PayPal Account you can still pay with your Credit / Debit Card,
but this will be through PayPal ONLY.
VAT and TAX is not included, please not.
● Will ship order within 1 working days after get your payment. We do NOT
accept any Email/Message note before or after you place orders.
● If item price is over $15, we'll ship with tracking number. Or it depends(except US).
● Shipping to US,AU,UK and CA takes about 7-15 working days for delivery normally.
shipping to other countries is about 7-25 working days. If remote
countries, like Peru, Chile,Brazil and so on, it takes about 25-45
working days for delivery normally.Economy shipping takes about 10
working days more than standard shipping.
is out of control. Sometime shipping may take longer time. Hope you can
wait some more days. If item did not arrive before Estimated date, pls
contact us. We can refund or resend first, don't worry. Don't leave a
negative response before contact us. Thank you very much.
●We understand that not every purchase is a good one for every custome
Please note that we only accept returns within 30 days after delivery.
the item is defective/DOA (Dead on Arrival) we must be notified within 2
days of arrival, and a refund in full will be granted after item is
●Returns after 30 days will not be accepted.
●Please allow up to 3 business days for your item to be inspected and your return to be be processed.
●We will make every effort to make your shopping the most pleasant and wonderful! Any question feel free to contact us!
●Please do not leave negative and neutral rating , if you have any questions , please contact us . We will do best to solve it.
reply your message within 24 hours on working day because of jet lag.
If Weekends or holidays, we'll reply within 48 hours. Will do best to
solve problem. Please trust us.
Usb Converter Wifi R3 Atmega328p Atmega328 Esp8266 Esp8266 (32mb Memory)
1'' Socket Adapter Module Board For 8 Pin Nrf24l01+ Wireless Transceiver
Uno+wifi R3 Atmega328p+esp8266 (32mb Memory) Usb-ttl Ch340g For Arduino Nodemcu
Wifi Wireless Module Bluetooth Base Esp-32 Esp32 2.13 Development Board