10V-60V Volt 30A Battery Under Voltage Control Over-discharge Protection Module For Sale
10V-60V Volt 30A Battery Under Voltage Control Over-discharge Protection Module:
Product Description Features:100% brand new and high qualityMade of high-quality materials, durableThe battery control module has automatic charging and automatic power-off functions, and is suitable for storage batteries and lithium batteries. The parameters are adjustable and can be stored in the memory after power offThick circuit board, long-lasting performanceEasy to install and safe to useThe parameters are adjustable and can be stored in the memory after power offSuitable for storage batteries and lithium batteriesThe battery is automatically charged under voltage and the load is disconnected, and the battery is discharged under voltage and connected to the loadProduct parameters:Control voltage: 10V-60VControl current: 30AControl accuracy: 0.1VVoltage deviation: ±0.1VApplication: battery and lithium batterySize: about 9.5*6*3.3cm / 3.7*2.3*1.2inchWeight: 110gProduct settings:E.g:Take a 12V battery as an example.Press the S1 button until the digital tube flashes to set the overvoltage to 14.4V. Press the S2 key until the digital tube flashes to set the undervoltage to 10.5V. When the battery voltage is lower than 10.5V, the load will be disconnected after a delay of 6 seconds. If the battery voltage recovers to more than 10.5V within 6 seconds, the load will continue to work, and when the high-current load is started, the delay cannot work normally due to the fluctuation of the battery voltage. When the load is disconnected, the module is connected to the charger, and the load stops charging when the load reaches 14.4V.Note: When the undervoltage value cannot be increased, adjust the overvoltage value first.Connect the battery first, and the module is powered by the battery.Voltage setting method:S1 overvoltage: charge stop voltage or load start voltageIn the normal mode, press the S1 key to display the current overvoltage value.Press and hold the S1 button until the display flashes, and then press the S1 and S2 buttons to adjust the overvoltage value.S2 undervoltage: charging start voltage or load stop voltageIn the normal mode, press the S2 key to display the current undervoltage value.Press and hold the S2 button until the display flashes, and then press the S1 and S2 buttons to adjust the undervoltage value.In the normal power consumption mode, press and hold the S1 and S2 keys at the same time until the digital tube displays 888, the original factory setting is successfully completed.Package list:1 *Battery control module Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2.Please allow slight manual measurement deviation for the data.Payment We accept payment via Paypal only. Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.Delivery details We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive response is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.