When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Quality valves from a real company — buy with confidence.Best warranty and parts availability.
General
1/2" Hose Barb
2-way / 2-position valve
11/32" (8.5 mm) internal orifice
Coil / Electrical
Pressure and Temperature
3 to 90 PSI (0.2 to 6 BAR)
Valve Materials
Nylon valve body
NBR diaphragm
Suitable Media
Low Viscosity Fluids
Not recommend for Diesel or Gasoline
Dimensions
Height: 2-3/8"
Length:3-1/4"
Width:1-3/8"
GENERAL
This is a great general purpose valve for water and other low viscosity fluid applications. These valves are suitable for potable (drinking) water, but do not have any 3rd party certifications such as NSF 61. All the "wet" components are made out of FDA listed materials.
Like most diaphragm-type valves, this valve requires minimum pressure (3 psi) to operate. It is intended to be used in pressurized systems, not in gravity feed systems. The pressure may come from city water pressure, pump etc.
This valve has a 11/32" (8.5 mm) orifice so any restriction in your system should be relatively minimal.
The inlet and outlet ports are for 1/2" ID (inside diameter) hose. You can secure the hose with standard hose clamps available at hardware stores, auto parts stores etc.
NORMALLY OPEN DESIGN
This is a normally open valve. Normally open valves are "OPEN" in their de-energized state (i.e. when no electrical power is applied, the valve is open). Once the coil is energized, the valve closes.VALVE COIL / ELECTRICAL
The valve coil is nylon encapsulated and is water resistant (but may not be submerged).
The coil is rated for continuous duty, which means that the coil temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves. If your application requires extremely long activation periods, please contact us for additional advise.
TECH SUPPORT / CUSTOMER SERVICE
We care about our customers. Please contact us if you need any help or tech support!
PARTS AVAILABILITY
We carry repair kits and coils for most of our valves. Please contact us for pricing and availability.12-MONTH WARRANTY
Our warranty works without hassles. All replacements are quickly shipped from our warehouse in San Diego, California. You are responsible for the cost of shipping the defective item back to us; we gladly cover shipping cost back to you. If time is of essence, make sure to call us first. We understand that down-time can be expensive and we will do our best to work with you.Please note that diaphragms and coils are considered "wear and tear" items and are not typically covered by the warranty.30-DAY RETURNS
If you are not happy with our products for any reason, you may return them for a full refund (excluding shipping charges) within 30 days of the purchase.OEM CUSTOMERS AND LARGE QUANTITY ORDERS
We work with Original Equipment Manufacturers (OEMs) on regular basis. Please contact us for OEM pricing and/or large quantity discounts. _gsrx_vers_486 (GS 6.5.1 (486))1/2" NPT 12V DC Brass Electric Solenoid Valve Water Air Gas Viton NC 12VDC
$33.95
1/2" 12V DC Electric Brass Solenoid Valve Water Gas Air 12 VDC -
$44.95
1/2 in 12V DC Brass Electric Solenoid Valve NPT Gas Water Air Normally Closed
$23.15
Popular Forums