BlackBerry Forums Support Community
              

Reply
 
Thread Tools
Old 07-30-2008, 10:01 PM   #1
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default 8300 Disassembly w/photos

Please Login to Remove!

I noticed this 8300 series was missing from the FAQ, so here it is.

First, you will need both a T-5 and T-6 driver.

Remove the battery cover, and the two T-5 screws at the top.



Next, remove the bottom piece. This may require some GENTLE prying from the hole that is located somewhat underneath it. Be very careful with this step, try and pull the piece away. The brown ribbon underneath is the antenna, and if this is damaged then you will have 0 reception.



Next, gently pull back the side pieces. Note that these are still attached at the bottom, you simply want to loosen the clips. This step may not be necessary, but I have found that it lets the front come off more easily.



Then, gently remove the front plate. There may be a seal between the front faceplate and the LCD that will want to stick to LCD. You may need to replace this seal if it doesn't come off in one piece. Once this step is done the keyboard will be lose and may just fall out, depending on how you are holding the device.



Now, remove the 2 bottom screws using a T-6 driver.



Next, remove the 2 center screws, using your T-6 driver.



This will separate the back and center pieces.



At this point you can access the LCD and all internal workings of the device. Simply reverse the directions to reassemble. I have noticed that the side pieces should go on TOP on the metal around the LCD for the best fit, even though it looks at first like they should go between the metal and the circuit board.

If removal of the lcd is necessary (for example: you got the device wet and want to alcohol wash the circuit board) the lcd display is delicate and is stuck to the circuit board pretty good. it's recommended to use a credit card between the display and the circuit board to gently pry the display off of the circuit board.


Do this in a clean environment, and it is recommended to wear gloves, as fingerprints on the screen are quite the pain to remove.

Last edited by John Clark; 08-09-2008 at 01:20 AM..
Offline   Reply With Quote
Old 07-30-2008, 10:25 PM   #2
Trimix
BlackBerry Master
 
Trimix's Avatar
 
Join Date: Apr 2008
Location: smelLA, caLAMEfornia
Model: 8320
OS: 4.5.0.182
PIN: infarina
Carrier: of alotta bacteria
Posts: 4,932
Default

Nice resource. Thanks for doing this.
Offline   Reply With Quote
Old 07-30-2008, 10:30 PM   #3
neftv
Thumbs Must Hurt
 
Join Date: Jun 2008
Model: 8310
Carrier: AT&T
Posts: 188
Default

It is nice to know this. Maybe it should be a sticky.
Oh man, I hope I won't have to take mine (8310) apart unless someone comes out with a 3G upgrade.
Offline   Reply With Quote
Old 07-30-2008, 10:31 PM   #4
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default

You are welcome. I had to take mine apart to replace the handset speaker, as mine somehow got blown and was very rattly. Luckily Steve over at HorizonWirelessOnline.com - Horizon Wireless, The World’s Cellular Repair Center hooked me up with a new one, but I figured since this was missing from the FAQ I would take pics as I went along.
Offline   Reply With Quote
Old 07-30-2008, 10:40 PM   #5
DacyJ
BlackBerry Extraordinaire
 
DacyJ's Avatar
 
Join Date: Jun 2007
Location: In the Off Topic Lounge.
Model: 9000
OS: 4.6.0.282
PIN: g Bomb!
Carrier: The Newest AT&T
Posts: 2,321
Default

Wirelessly posted (By Super Blackberry)

Hey Nick, the top tabs from the sides where the screws go into the face plate, do they go in between the metal lcd plate or on top? When I replaced the face plate on mine it looked like they went between the metal and the board.
__________________
Dacy Jackson
Offline   Reply With Quote
Old 07-30-2008, 10:42 PM   #6
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default

At first I thought they went between as well, but it sure fits a lot better with the plastic on top of the metal as far as a good seal. I have edited the OP to reflect this

Last edited by NickfromIL; 07-30-2008 at 10:43 PM..
Offline   Reply With Quote
Old 07-31-2008, 01:00 AM   #7
Horizon Wireless
Platinum Sponsor
 
Horizon Wireless's Avatar
 
Join Date: Dec 2006
Location: CANADA
Model: 9920
OS: 5.2.0.168
PIN: 3218B513
Carrier: ROGERS AND FIDO
Posts: 885
Default

Great guide Nick, 2 thumbs up!!!
__________________
http://www.horizonwirelessonline.com
Wholesale and Retail Blackberry Unlocks - All models & carriers
INSTANT 10% off : HOR10
Offline   Reply With Quote
Old 07-31-2008, 01:55 AM   #8
JSanders
Crimson Tide Moderator
 
JSanders's Avatar
 
Join Date: Oct 2004
Location: North of the moss line
Model: Z30
OS: 7.0sumtin
PIN: t low
Carrier: Verizon
Posts: 41,921
Default

Nice guide, yea! Thanks.
Offline   Reply With Quote
Old 08-01-2008, 02:40 PM   #9
Yellowman
Knows Where the Search Button Is
 
Join Date: Jan 2007
Model: 9800
Carrier: Rogers
Posts: 30
Default

i am having a hell of a hard time at the step where you remove the front faceplate. I was successful all the way up to this point. ANy idea what is preventing me from pulling the front face off? I don't want to yank it, but it seems that it does not want to come off.

Let me know if there is a trick to this. I followed the instructions to a "T" and have pulled back the side pieces. It almost looks like the entire unit wants to come with the plate.

Let me know
Offline   Reply With Quote
Old 08-01-2008, 02:48 PM   #10
John Clark
BBF Moderator
 
John Clark's Avatar
 
Join Date: Jun 2005
Model: Z30
OS: 10.2.1.x
PIN: s & needles
Carrier: AT&T
Posts: 34,720
Default

Yes, there IS a trick that is not mentioned. The faceplate has a seal on it that sticks pretty good to the lcd display. I have disassembled two of these and on one the seal came off in one piece and still attached to the front face plate. On the other the foam seal tore and I had to replace it. This is the hardest BB to disassemble of all the models I've tried.
Offline   Reply With Quote
Old 08-01-2008, 02:56 PM   #11
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default

Sorry guys, the 8330 that I used for this guide doesn't have that. While there is a thin foam seal, it is VERY securely attached to the front plate and did not stick at all to the LCD. I will edit the guide to include this, thanks.
Offline   Reply With Quote
Old 08-01-2008, 02:58 PM   #12
Yellowman
Knows Where the Search Button Is
 
Join Date: Jan 2007
Model: 9800
Carrier: Rogers
Posts: 30
Default

Quote:
Originally Posted by John Clark View Post
Yes, there IS a trick that is not mentioned. The faceplate has a seal on it that sticks pretty good to the lcd display. I have disassembled two of these and on one the seal came off in one piece and still attached to the front face plate. On the other the foam seal tore and I had to replace it. This is the hardest BB to disassemble of all the models I've tried.
Thanks for letting us know. But care to let us know what the trick is to get it off without an issue?

Should I be sliding in a screwdriver and trying to remove the seal from the faceplate and the LCD? I don't really want to play around with the LCD, so any helpful tips would be appreciated. What I really want to try and do is access the keyboard and see if there is something underneath it that is causing it not to function for specific keys.
Offline   Reply With Quote
Old 08-01-2008, 04:49 PM   #13
rachamphetamine
BBF Moderator
 
rachamphetamine's Avatar
 
Join Date: Mar 2008
Model: --
PIN: E SOL
Carrier: VZW
Posts: 3,117
Default

I vote for a sticky!
Offline   Reply With Quote
Old 08-01-2008, 07:17 PM   #14
dude33333
Thumbs Must Hurt
 
dude33333's Avatar
 
Join Date: Jul 2008
Location: Maine
Model: 8320
OS: 4.5.0.52
PIN: N/A
Carrier: t-mobile
Posts: 99
Default

nice guide.... scary tho. hope i never havta do that to mine, just cleaning the trackball was too much for me! haha
Offline   Reply With Quote
Old 08-01-2008, 07:37 PM   #15
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default

Haha, I know the feeling. Luckily this is a Verizon paid device, so I figured worst case I mess it up, and I am not out of pocket anything. Made it a little easier.
Offline   Reply With Quote
Old 08-01-2008, 08:03 PM   #16
coldconfession13
CrackBerry Addict
 
coldconfession13's Avatar
 
Join Date: Apr 2007
Location: san antonio,tx
Model: 9550
OS: 5.0.0.230
PIN: 30fd8208
Carrier: Verizon
Posts: 904
Default

Wirelessly posted

Hey if this gets out of your hands and you come to a spot where you messed up I suggest send it to horizon.
__________________
http://www.horizonwirelessonline.com
Unlock codes, Parts, Repair just tell them Albert sent ya

http://www.blackberryfaq.com
Offline   Reply With Quote
Old 08-01-2008, 08:34 PM   #17
Brad4d
Talking BlackBerry Encyclopedia
 
Brad4d's Avatar
 
Join Date: Apr 2008
Model: 8310
OS: 4.5.0.55
PIN: This is BB Fourms Not eHarmony.
Carrier: Rogers Wireless
Posts: 204
Default

Either way your gutsy!
__________________
Blackberry 8310 Titanium
Offline   Reply With Quote
Old 08-01-2008, 09:16 PM   #18
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default

I already had to have Horizon send me some new screws, I busted a T-5 screw putting it back together. They are tops for sure.
Offline   Reply With Quote
Old 08-09-2008, 01:17 AM   #19
NickfromIL
Thumbs Must Hurt
 
Join Date: Feb 2008
Location: Northern IL
Model: 8330
OS: 4.5
Carrier: Verizon
Posts: 2,076
Default

Sticky? Please.
Offline   Reply With Quote
Old 08-13-2008, 12:48 PM   #20
dleccord
Thumbs Must Hurt
 
Join Date: Jun 2008
Model: 8320
PIN: N/A
Carrier: T-Mobes
Posts: 52
Default

did you use a camera to take these pics?
Offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Rare Vintage Bel Air Super De Luxe Industrial Sewing Machine, Apple Green, 1950s
$225.0
Rare Vintage Bel Air Super De Luxe Industrial Sewing Machine, Apple Green, 1950s pictureVINTAGE APPLE LITE VRAM 128K X 8 BOARD CARD 820-0522-A
$119.0
VINTAGE APPLE LITE VRAM 128K X 8 BOARD CARD 820-0522-A   pictureHAYES SMARTMODEM 1200 EXTERNAL MODEM SMART MODEM VINTAGE APPLE MACINTOSH
$40.0
HAYES SMARTMODEM 1200 EXTERNAL MODEM SMART MODEM VINTAGE APPLE MACINTOSH pictureApple store window display large iPod - THE OFFICE RARE vintage collectors item
$500.0
Apple store window display large iPod - THE OFFICE RARE vintage collectors item pictureApple store window display large iPod - U2 BONO - RARE vintage collectors item
$500.0
Apple store window display large iPod - U2 BONO - RARE vintage collectors item picture






Copyright 2004-2016 BlackBerryForums.com.
The names RIM and BlackBerry are registered Trademarks of BlackBerry Inc.