|
|
|
07-17-2009, 12:27 PM
|
#1
|
Thumbs Must Hurt
Join Date: May 2007
Location: DC
Model: 9930
OS: Windows 7
PIN: N/A
Carrier: Verizon
Posts: 58
|
Fix: BlackBerry Tour Back Door (back cover)
Please Login to Remove!
Many of you have complained about the back cover of the BlackBerry Tour not being very solid. In fact, there is too much give in the relationship between the cover and the shell of the device. It is as if in the manufacturing of the device they failed to add two squares of rubberized padding to the inside corners to make it fit snuggly. Therefore I have sadly had to engineer a makeshift fix to make my Tour feel whole. Please see the steps that I outlined below if you would like to solidify your Tour’s back door.
How to fix Tour back cover:
1) Obtain a business card
2) Cut two small squares from the card about the size of a BlackBerry Tour letter key (see picture)
3) Obtain some Elmer’s glue or a small piece of tape rolled so it is sticky on both sides
4) Remove the back cover
5) Place the squares with sticky substance (tape/glue) in the lower sections of the inside cover as noted in the picture. Make sure the squares ride up close to the rails of the inside cover. You can faintly make out what appears to be an area where rubberized pads should be located. Place the paper such that they are nearly in line with the “lid” of the case. (see picture)
6) Place the cover back on the Tour and you should be set to go.
This made a major improvement for me. Let me know if you have any questions or other ideas.
Thanks!
DC-WiFi
|
Offline
|
|
07-17-2009, 12:51 PM
|
#2
|
CrackBerry Addict
Join Date: Oct 2006
Location: NYC
Model: 9700
OS: 6.0.0.358
Carrier: AT&T, VZW
Posts: 704
|
While I agree that this will most likey Help! I do have to say shame, shame, shame on RIM for even making loyal users go through such a process. Get your act together RIM, and spend some of those billions on quality control!!!
|
Offline
|
|
07-17-2009, 01:05 PM
|
#3
|
Talking BlackBerry Encyclopedia
Join Date: May 2007
Location: Back Forty
Model: 96xx
OS: O+
PIN: Firing
Carrier: Southern Bell, PrimeCo, Omnipoint, United Telecom
Posts: 426
|
Thanks for taking the time and effort of posting this DC-WiFi. While I do agree that RIM should continue to look at their QC, I can also appreciate the innovative thinking to fix things ourselves. Like the business card trick for a better Storm keyboard. Hopefully RIM will address and will come up with a more permanent fix.
__________________
Semper Paratus - Semper Fidelis - Semper Vigilans - Laus Deo
|
Offline
|
|
07-17-2009, 01:08 PM
|
#4
|
Thumbs Must Hurt
Join Date: Oct 2008
Location: ABE, PA
Model: 9650
OS: 5.0.0.810
PIN: N/A
Carrier: VZW
Posts: 69
|
Kind of like when Storm users did the same type of thing to increase the sensitivity of the screen button, put a cut peice of business card under the battery.
__________________
Insert signature here.
|
Offline
|
|
07-17-2009, 02:46 PM
|
#5
|
Knows Where the Search Button Is
Join Date: May 2007
Model: 9650
PIN: N/A
Carrier: Verizon
Posts: 41
|
Quote:
Originally Posted by DC-WiFi.com
Many of you have complained about the back cover of the BlackBerry Tour not being very solid. In fact, there is too much give in the relationship between the cover and the shell of the device. It is as if in the manufacturing of the device they failed to add two squares of rubberized padding to the inside corners to make it fit snuggly. Therefore I have sadly had to engineer a makeshift fix to make my Tour feel whole. Please see the steps that I outlined below if you would like to solidify your Tour’s back door.
How to fix Tour back cover:
1) Obtain a business card
2) Cut two small squares from the card about the size of a BlackBerry Tour letter key (see picture)
http://dc-wifi.com/friar/bizcard.jpg
3) Obtain some Elmer’s glue or a small piece of tape rolled so it is sticky on both sides
4) Remove the back cover
5) Place the squares with sticky substance (tape/glue) in the lower sections of the inside cover as noted in the picture. Make sure the squares ride up close to the rails of the inside cover. You can faintly make out what appears to be an area where rubberized pads should be located. Place the paper such that they are nearly in line with the “lid” of the case. (see picture)
http://dc-wifi.com/friar/blckback.jpg
6) Place the cover back on the Tour and you should be set to go.
This made a major improvement for me. Let me know if you have any questions or other ideas.
Thanks!
DC-WiFi
|
The only issue with this is that its creates an ever so slight gap between the cover and the phone. I can see dirt and dust getting in there very easily. Im sure RIM has to have heard about this and is coming up with some sort of fix...you would think...
|
Offline
|
|
07-17-2009, 03:03 PM
|
#6
|
Thumbs Must Hurt
Join Date: May 2007
Location: DC
Model: 9930
OS: Windows 7
PIN: N/A
Carrier: Verizon
Posts: 58
|
Quote:
Originally Posted by Shotiime11
The only issue with this is that its creates an ever so slight gap between the cover and the phone. I can see dirt and dust getting in there very easily. Im sure RIM has to have heard about this and is coming up with some sort of fix...you would think...
|
I thought about that, and I see your point, but without the paper mine still has a similar gap, but the gap just slides from one side to the other. Now the gap is constant, but it doesn't allow the cover to slide around everywhere.
I too hope they get a real fix soon.
|
Offline
|
|
07-17-2009, 08:41 PM
|
#7
|
Knows Where the Search Button Is
Join Date: Oct 2007
Location: Pacific Northwest
Model: 9630
OS: 5.0.0.732
PIN: BALL WIZARD
Carrier: Verizon
Posts: 15
|
Seems to me it would make more sense to warm the cover (either with a hairdryer, heat-gun, or CAREFULLY in an oven), then gently bow the cover (corners down, latch up)holding it until it cools, to slightly warp it. Then, when putting the cover back on, the corners should touch first, then pressing the center down to latch it will create a snug fit.
Haven't tried mine, yet... heat-gun is at my place of work, and I'm not brave enough to try the oven.... yet...
|
Offline
|
|
07-17-2009, 11:49 PM
|
#8
|
Thumbs Must Hurt
Join Date: Jul 2009
Model: 9630
PIN: N/A
Carrier: Verizon
Posts: 62
|
Thank you for taking a lot of your time making this guide
it was very helpful thank you
__________________
friends hate me cause i'm always on my blackberry...
|
Offline
|
|
07-18-2009, 03:00 PM
|
#9
|
Knows Where the Search Button Is
Join Date: Oct 2007
Location: Pacific Northwest
Model: 9630
OS: 5.0.0.732
PIN: BALL WIZARD
Carrier: Verizon
Posts: 15
|
Quote:
Originally Posted by Brian C
Seems to me it would make more sense to warm the cover (either with a hairdryer, heat-gun, or CAREFULLY in an oven), then gently bow the cover (corners down, latch up)holding it until it cools, to slightly warp it. Then, when putting the cover back on, the corners should touch first, then pressing the center down to latch it will create a snug fit.
Haven't tried mine, yet... heat-gun is at my place of work, and I'm not brave enough to try the oven.... yet...
|
Update: Stupid me, I discovered that my heat-gun was NOT at my place of work, but sitting right where it's supposed to be, in my garage.
Soooo.... Tried warming the cover and bending it. It WILL work. Although, wear some cotton gloves (or protect your digits with a cotton cloth) as the latch will get HOT. Hold the piece slightly bowed (push the backside of the cover with your thumbs, while pulling the corners down with the rest of your fingers) and hold until it cools. You can speed this up by holding the cover deep in your freezer until it holds shape. Don't over-do it!! It doesn't take much tweaking. Now, the cover fits tight (with no gaps under the corners) on my Tour.
|
Offline
|
|
07-20-2009, 09:49 AM
|
#10
|
Thumbs Must Hurt
Join Date: May 2007
Location: DC
Model: 9930
OS: Windows 7
PIN: N/A
Carrier: Verizon
Posts: 58
|
Quote:
Originally Posted by Brian C
Soooo.... Tried warming the cover and bending it. It WILL work. Although, wear some cotton gloves (or protect your digits with a cotton cloth) as the latch will get HOT. Hold the piece slightly bowed (push the backside of the cover with your thumbs, while pulling the corners down with the rest of your fingers) and hold until it cools. You can speed this up by holding the cover deep in your freezer until it holds shape. Don't over-do it!! It doesn't take much tweaking. Now, the cover fits tight (with no gaps under the corners) on my Tour.
|
Unreal! I cannot believe you did it! I am glad it worked for you, but I don't think I have the intestinal fortitude to take a heat gun to my BlackBerry. Thanks for the good testing though.
|
Offline
|
|
07-20-2009, 09:50 AM
|
#11
|
BBF Moderator
Join Date: Jul 2005
Location: Southern Florida
Model: 9650
OS: 6.0.0.333
Carrier: Verizon BIS
Posts: 14,484
|
Thank you for sharing. To echo above, shame on RIM
__________________
------
Follow @akosnitzky on Twitter
LET'S GO CANES!
|
Offline
|
|
07-20-2009, 08:26 PM
|
#12
|
CrackBerry Addict
Join Date: Oct 2006
Location: NYC
Model: 9700
OS: 6.0.0.358
Carrier: AT&T, VZW
Posts: 704
|
WOW..... Heat guns, hair dryers! I really hope somebody from RIM is reading this some how , and if they are, GET YOUR ACTS TOGETHER! Not cool that any if us should have to do stuff like this....however, we are a crazy following...lol
|
Offline
|
|
07-20-2009, 09:39 PM
|
#13
|
CrackBerry Addict
Join Date: Oct 2006
Location: NYC
Model: 9700
OS: 6.0.0.358
Carrier: AT&T, VZW
Posts: 704
|
An extra piece of that rubber would most likely do the trick!
Last edited by sean76; 07-20-2009 at 09:41 PM..
|
Offline
|
|
07-21-2009, 07:33 AM
|
#14
|
Knows Where the Search Button Is
Join Date: Jul 2009
Model: 9630
OS: 5.0.0.419
PIN: N/A
Carrier: Verizon
Posts: 23
|
I did this fix with the little pieces of business card on the back plate and it worked fantastic... thanks!
|
Offline
|
|
07-21-2009, 09:24 AM
|
#15
|
Talking BlackBerry Encyclopedia
Join Date: Aug 2007
Location: Tri-State Area, NY
Model: 9630
Carrier: VZW
Posts: 244
|
Try placing some electrical tape on on the surface where the latch of the door holds onto the device. Maybe 2 layers. It won't be easy to get the tape in there, but doing it in this manner will pull the door closer to the device and reduce the gap. I dont think it will reduce the side to side movement, but I'd rather have the gap closed. It essentially does the same thing as heating and bending the cover. Worth a try, I have not tried it yet.
|
Offline
|
|
07-21-2009, 10:03 AM
|
#16
|
Knows Where the Search Button Is
Join Date: Oct 2006
Location: SoCal
Model: 9600
Carrier: Verizon
Posts: 38
|
I have a folded $20 inside the cover that does about the same.
|
Offline
|
|
07-21-2009, 10:34 AM
|
#17
|
Talking BlackBerry Encyclopedia
Join Date: Apr 2006
Location: New York, NY, USA, Earth
Model: 9630
OS: 5.0.0.548
Carrier: Verizon
Posts: 209
|
Quote:
Originally Posted by jimbob_
I have a folded $20 inside the cover that does about the same.
|
For those of us not as well off as you, would a folded $1 work?
__________________
Illegitimus non carborundum
|
Offline
|
|
07-21-2009, 10:56 AM
|
#18
|
Knows Where the Search Button Is
Join Date: Oct 2006
Location: SoCal
Model: 9600
Carrier: Verizon
Posts: 38
|
I don't think a $1 is thick enough! and I can't buy a coffee with it either.
this solution is much nicer than the dolllar bill, which really doesn't fit that well, honestly.
|
Offline
|
|
07-21-2009, 06:00 PM
|
#19
|
New Member
Join Date: Dec 2005
Model: 9630
Carrier: Bell
Posts: 1
|
Quote:
Originally Posted by nosidam
For those of us not as well off as you, would a folded $1 work?
|
I've been trying for about an hour trying to fold the damn loonie, just won't fit!
FYI - I'm in Canada - No $1.00 bills!
|
Offline
|
|
07-24-2009, 01:25 PM
|
#20
|
Thumbs Must Hurt
Join Date: May 2007
Location: DC
Model: 9930
OS: Windows 7
PIN: N/A
Carrier: Verizon
Posts: 58
|
So are people saying that there is a specific "batch" of Tour's made in Mexico that have the crappy fitting back cover? If so, that means we can swap it out for a new Tour which should have a solid cover, right?
|
Offline
|
|
|
|