[Aviator168]

BlackVoib demo/beta is released. Please leave comments here or on the site.

Enjoy
BlackVoib Development Team.

http://BlackVoib.webs.com

[soupey]

Awesome!...just need to sort out how to set up voipcheap or localphone now. Thanks!

[themlruts]

I have to figuer out how to setup callcentric

[soupey]

can you post a quick writeup on what info is needed for all the fields? what needs to go into the APN if i want this to work over 3G? is the username supposed to be sip:username@voipservice.com or just the username itself?

thanks

[themlruts]

i can close the app. Looks like battery pull

[Aviator168]

BlackVoib setup

Display Name, User Name, Password and Domain are all required.

Register with domain can be checked if you wish to receive phone calls.

Outbound Proxy is optional. If it is blank, it would be the same as the domain IP address.

WIFI. When is checked, BlackVoib uses WIFI to connect to server. Other OTA is used.

STUN Server. Optional, but needed for most setups. This field is only left blank only if your device is in the same subnet as your SIP server.


APN. It would usually work went left blank. However, sometimes you do have to specify the APN. I don't have all the carrier APNs. But for AT&T, the APN is wap.cingular. You can also find these info on the net by googling them.

This link has good info on APNs
http://www.blackberryfaq.com/index.p...N/TCP_settings

[Aviator168]

Originally Posted by themlruts

I have to figuer out how to setup callcentric

Callcentric uses port 5080 instead of the default 5060. So the way to configure the domain is callcentric.com:5080

[lburg]

I have BB9700. Install the app and configured as instructed. However, I recieve an error IP address of Registrar cannot be resolved and IP address of Outbound proxy cannot be resolved. Any suggestions?

[Aviator168]

Originally Posted by lburg

I have BB9700. Install the app and configured as instructed. However, I recieve an error IP address of Registrar cannot be resolved and IP address of Outbound proxy cannot be resolved. Any suggestions?

Need to know the setting and the service provider. It seem that there are a lot of providers are not using the default port 5060.

[lburg]

I am using AT&T. I tested my Wifi connection and I am able to ping the IP address.

[Aviator168]

If you are using WIFI, it really does not matter which carrier you use. We want to see which service provider you are using. There are many out there that have their own version of SIP. We target systems like Asterisk, pbxes.org and the like.

[lburg]

I am using a regional commerical VOIP provider. I use the same configuration on xten.com with any issues.

[lburg]

I just attempted setting up using Voice Cheap and received the exact same cannot resolve the IP of the Registrar. I would much prefer this to work on my local commerical VOIP provider. Other SIP apps work with them on Droids. Whatever you can do to help would be most appreciated.

[dledeaux]

I get the exact same errors about not resolving IP addresses. I've also tried inputting the IP address itself and the error is the same.

I'm trying to set up with Gizmo5 according to their instructions located on their page. Default port is 5060.

Unfortunately I can't post a link to them because I haven't created enough threads yet.

[soupey]

i'm having no luck getting this working, it connects to the voip but all calls fail (or i just dont hear anything on the other end).

trying to use voipcheap or localphone.

[soupey]

well, got it to work over wifi for two calls, after closing and reopening the program, it just says "call failed" over and over again now. i can only get it working over wifi, 3g won't connect.

[Tumaxys]

I tested with 3G and Wifi (at my office and at home), the result is :
- With 3G, the voice quality was quite good. No noise, no delay or very little.
- Wifi scenario : the voice was delayed quite much. I spoke several words and the other end must wait a little bit to hear my voice.

- In both scenarios, voice always went through speaker phone, not handset.
I am using Bold 9000.
Anyway, as I understand, this is the first SIP client for BB, congratulate.
Cheer!!!

[lburg]

Please let us know what VOIP service provider you are using. What are the settings so that we may determine if our BB can get the IP resolved.

[gorkhi]

Hi
I am using actionvoip
I entered
user:
password:
domain: unchecked.
stun: stun.actionvoip.com

it is giving me same error ip address to registrar server cannot be resolved

I have to give it a try over wifi.

[lburg]

I think you need to put something in the domain.