[BA - Blackberry Atlanta]

So has anyone heard when they will release new firmware to fix the DCR problems in the v4.0.2 code on th 7250? I have tried everything and when I get into an area where the signal might be marginal, then it will start cycling between EVDO and 1xRTT which kills the battery and inevitably results in Data Connection Refused. Very Frustrating!

[joebogey]

OK, here it goes. I've read so much info on this my head is spinning. I've had my BB7250 for ~4 months, it is on a BES. When I go to the VZW page it only lists 4.0 desktop manager and OS versions for my phone. It does however list version 4.1 for the 7130e. And as I work for Verizon landline I know that the possibility of not getting the right answer on the first call is high, I figured I would go to the source.



First- If I download the 4.1 Software from the BB site (to me this looks like it is more for BES servers administrators) will it cause a problem with my VZW service.



Second- Do I need to contact VZW to do anything, as I have the unlimited data plan along with the phone plan, other than adding the vzw password to stop the data connection refused errors?



Any info anyone can pass along would be appreciated, again there is a lot of info on this available here and I just want to get the latest.



Thanks

[Lithium]

Hey all,

Thanks for this guide! This forum has been such a great resource to me, I never have to post any questions!

I upgraded my 7250 to v4.0.2.41 by following the steps, and everything seems to be working just fine. My two problems are probably more than an annoyance than anything, but I wanted to see if anyone else ran into the same issues:

1) There is a solid roaming triangle on the screen when I am in an EVDO area. This doesn't seem to affect anything so far. I've called VZW Data Services a couple times on this, and they said that it's nothing to worry about, and that it "should" be fixed in a PRL update later.

2) While in the EVDO coverage area, my display sometimes shows 1X (and will sometimes bounce between 1X and 1XEV), even though I believe that it's using EVDO (graphical glitch maybe?). I tested this by making sure the phone shows 1X, refreshing a web browser page to constantly have a data connection open, and I can *still* receive incoming calls during this test. This makes me think that the display is incorrectly showing 1X, but is actually on EVDO.

I've done the *228 opt 1 and 2 several times over the past couple of days to no avail. Like I said, it may just be a minor annoyance, but I thought I'd check here first.

[KonTiki]

If you are on a fringe area it will switch through any and all of the different 1x, 1x, EVDO, choices .

[Lithium]

Originally Posted by KonTiki

If you are on a fringe area it will switch through any and all of the different 1x, 1x, EVDO, choices .

Ahh, that makes sense... I checked my area on a map, and it's close to the border of EVDO coverage.

Good call, thanks!

[zwheeloc]

I have been experimenting with try to figure out why I go on the cycle of 1X, 1XEV and DCR. One thing I am trying and I have yet seen it cycle since yesterday afternoon was to go to Options --> Network and change the Network Selection Mode to Home Only. I was wondering if anyone else had tried this or has this set.
Zeff Wheelock

[Helix26404]

Originally Posted by word2218

it happens on my BB too.. are you now noticing problems with a roaming triangle? I remember you had mentioned that it was working perfectly for you before..

I have the roaming triangle too when outside the my area code, unless it's an EVDO area.

[telco]

ok, when i'm dialing up using vzaccess to use the 7130e i have i'm getting a.

Access was denied because the username and/or password was invalid on the domain.

anyone shed a light on wth is going on with this. Its setup on our BES server, i'm not sure what credentials its asking for, nor does it prompt me for any.

[KidSquid]

Greetings oh wise BlackBerry Leaders!

I just received a 7250 from Earthlink to replace my old original 957.

I am excited about the new speeds and all of the other features (especially the browser) which will now be available to me (i'm not going to use the phone at all)

My question is...CanI tether with the Earthlink model?

I've seen lots of comments about Verizons (and yes I know Earthlink is an MVNO of Verizon) but I've got to imagine there are some idiosyncrasies in getting the Earthlink unit to tether...

Can someone point me in the right direction? I've searched but found not definitive replys...

Many Thanks in Advance.

squid

[dangerousbehavior]

I guess I am a late early adopter of new technology.

Posting to see if anyone else has run into this as well as for information for others.

I have called Vzw and had the EVDO added to my account.
I did the update of the roaming list, etc. Updated Host Routing Table.
I think it was the number in the FAQ that I called but not remember 100% for sure but whatever number I called I was then instructed to call Customer Care since I was a b2b user. I was also told I would need my company's tax #, but that was not asked for when I talked to Customer Care. I was asked for my Company's name and their zip code.

Now I am to the point of trying to download the Desktop Mngr software. When I try to download the Desktop Manager I get the following message.

The number you have entered is not a valid Verizon Wireless phone number. To join in call Verizon Wireless at 1.800, etc, etc.

This number was ported from AT&T, either in early 2005 or late 2004. The odd thing is my wife's phone number works, she is now a Verizon customer although up until two weeks ago she had been a AT&T (Cingular) customer. She does not have a BB, I was just testing another number to see if I could get the software to download.

I did download the software using my wife's number but now when I try to install it, it fails.

Details on fail / specific error message to follow, once I run through it one more time.

Selected English for language
Selected primary location US
Selected BB Enterprise Server or BB Desktop Redirector.
Selected MS Exchange.
Redirect Messages using BB Enterprise Server.
Selected Start Desktop Manager Software when Windows starts.
Error: Internal Error 2738
http://msdn.microsoft.com/library/de...r_messages.asp

Going to try to dl the software again, and try to re-install, will post more.
If that does not work I am going to give Vzw a call back to try to find out why I can't dl the software using my BB phone #.

[essay182]

So nothing has changed on this guide yet right? I am going to need to update my 7250 before I go to FL next week because I want to take advantage of the EVDO coverage.


To bad I cant tether with my Powebook yet!

[Mark Rejhon]

Originally Posted by dangerousbehavior

Going to try to dl the software again, and try to re-install, will post more.
If that does not work I am going to give Vzw a call back to try to find out why I can't dl the software using my BB phone #.

When downloading BlackBerry Desktop from Verizon, and your ported number does not work, use the placeholder number 9785050000 if all else fails.

[sigtrap]

Verizon just released a new revision of the software as of today. I have not tested this yet, but will once I get home.

http://vzw.smithmicro.com/blackberry/

File: 7130eM_PBr4[1].1.0_rel229_PL2.2.0.98_A4.1.0.268.exe

[Dusty Saddle]

Originally Posted by sigtrap

Verizon just released a new revision of the software as of today. I have not tested this yet, but will once I get home.

http://vzw.smithmicro.com/blackberry/

File: 7130eM_PBr4[1].1.0_rel229_PL2.2.0.98_A4.1.0.268.exe

According to the site, this upgrade is only for the 7130e. Let us know if it works on your 7250.

[KonTiki]

Originally Posted by sigtrap

Verizon just released a new revision of the software as of today. I have not tested this yet, but will once I get home.

http://vzw.smithmicro.com/blackberry/

File: 7130eM_PBr4[1].1.0_rel229_PL2.2.0.98_A4.1.0.268.exe

Yes I would be very curious as to whether it would work on the 7250 also, and if it does please test the tethering options once you do, I have upgraded twice to the Telstra and the Sprint 4.1 versions and in both cases I lost tethering functionality.

[bryanhilton]

Well, after trying today 4.1 handhelds will not allow tethering according to verizon. It prompts for a user name and password whereas my 7250 automatically connects. Has anyone had any success with this?

[KonTiki]

I had the same identical issue with my 7250 after I upgraded to the non-Verizon versions of the 4.1 OS, even after using the format for the user and password. That is why i asked above that if they succeeded with the 7130e loading into a 7250 to try tethering, I have upgraded twice with Telstra and with the Sprint versions and both times had to down grade, I hope that once Verizon releases their version this problem be addressed, otherwise it is not worth it to me to upgrade.

[Aikidoka]

My rep gave me the "It's always done EVDO" when I called. Whatever. According to the tech she talked to, that first feature code does not exist and that software was supposed to have been pulled. The only feature code to add would be for tethering which I don't need. Still waiting for the update to finish.

[whsbuss]

Originally Posted by KonTiki

I had the same identical issue with my 7250 after I upgraded to the non-Verizon versions of the 4.1 OS, even after using the format for the user and password. That is why i asked above that if they succeeded with the 7130e loading into a 7250 to try tethering, I have upgraded twice with Telstra and with the Sprint versions and both times had to down grade, I hope that once Verizon releases their version this problem be addressed, otherwise it is not worth it to me to upgrade.

Did you have VZW add tethering to your account? It was the only way I could get tethering on my 7130 to work.

[KonTiki]

Yes I have it, and i can tether fine from within 4.0 OS just not able to from 4.1. If you call them and tell them you have a 7250 with 4.1 they tell you sorry they do not support that.