|
|
|
05-04-2009, 05:16 PM
|
#1
|
New Member
Join Date: May 2009
Model: 9000
PIN: N/A
Carrier: AT&T
Posts: 2
|
Ringer and Notification Volume -- TOO LOW
Please Login to Remove!
Hi all,
I am a Blackberry user since June 2006 when the Curve first came out. I recently had to upgrade to the BOLD 9000 when a software update/glitch rendered my Curve useless.
So I love the Bold; it has great features. But one thing that has been bothering me a lot lately is that its ringer and notifications (i.e. for new call, emails, text, etc.) are EXTREMELY quiet. Does anyone else have this issue or hear if this is a known problem? It appears it isn't widespread based on google searches I did so I'm hoping this is a one-off with my particular phone because I have a new one shipping to me as we speak.
Basically, even if I set my ringer profile volume to HIGH (both in and out of holster) it is barely audible from a few feet away. I've tried using different mp3 files as well as using the pre-loaded BBerry sounds.
You know the default sounds for incoming text messages, for example? That LightSpeed--it comes out so soft...and I don't think it was like that when I first got the phone. Could my speakers have screwed up (I have only had the phone for 2 weeks and have treated it in extremely pristine condition)? Or is this some other glitch I might have had.
I've done the batter pull, I've tried switching to different rings--the speaker phone, notifications, ringer just are so darn soft like a whisper. I would love to hear thoughts advice. Thanks.
|
Offline
|
|
05-04-2009, 08:53 PM
|
#2
|
BlackBerry Extraordinaire
Join Date: Apr 2006
Location: Jamaica
Model: 9000
OS: 5.0.0.610
PIN: 208E7C41
Carrier: LIME, Jamaica
Posts: 1,533
|
Wirelessly posted
Don't know if this will apply. How about turning on Audio Boost. This is found in the options of the Media setup.
|
Offline
|
|
05-05-2009, 06:47 AM
|
#3
|
BlackBerry Extraordinaire
Join Date: Nov 2008
Location: Mumbai
Model: iOS
OS: 5.0.1
PIN: OT Noir.
Carrier: Vodafone IN
Posts: 1,937
|
i've been pretty ok with the notification alerts. for the most part, i've got all my volumes set to about Medium. and i have no issues! Plus my ringtone is pretty loud in itself, 'cause it's a custom ringtone.
i've never missed an alert tbh. maybe try OS upgrade? but if you're getting a new piece, then you should wait and see if you have a problem there too..hopefully not!
|
Offline
|
|
05-05-2009, 09:21 AM
|
#4
|
CrackBerry Addict
Join Date: May 2007
Location: Winnipeg MB Canada
Model: 9700R
OS: 7.1.0.190
PIN: On Request
Carrier: Rogers Wireless
Posts: 902
|
The sound volume of ringtones and notifications seems to be also related to the OS version; but it's not always global across all sound files. What I mean by that is that I always used to use 'notifier cricket' for email notifications when using the vibrate profile. The cricket notification was quiet enough to be used with vibrate unless the room was completely dead, in which case it could be heard. After an OS upgrade (sorry, I don't remember which), cricket became much too loud to be used in this fashion. I had to switch to using some other notification sound which was not as loud.
Now that said, not all notifications became louder as I described above. Some of them became quieter, one of those being 'notifier lightspeed', which I used to use as the repeat reminder with BB Alerts. I can no longer hear this under the same conditions that I could hear it before.
To get around this problem, I downloaded an archive from the internet which had mp3/mid/wav versions of stock ringtones and notifications for the Bold. I copied these onto my onboard storage. I then used MP3Gain on it to increase and decrease the volume on a few of the individual notifications that I use most often. I also stitched together some short single-burst ringtones along with a silence sound file to form a longer multi-burst ringtone using a program called MP3Merge. I then increased or decreased the gain on the resulting file, again using MP3Gain to suit my needs.
__________________
-Klotar
Supervising Manager of the Department of Redundancy Department.
BlackBerry Certified Support Specialist
|
Offline
|
|
05-10-2009, 10:05 PM
|
#5
|
New Member
Join Date: May 2009
Model: 9000
PIN: N/A
Carrier: AT&T
Posts: 2
|
new device solved the problem--must have been an issue with the "new" device i originally bought from the att buggers (i also noticed my new blackberry that i got last week also isn't "loose" around the frame like my last one--it appears i got a new "return" last time and this one is great...
only complaint is that battery life (because of 3G) isn't as long lasting as the curve or a regular phone but i love it.
|
Offline
|
|
05-11-2009, 12:01 AM
|
#6
|
New Member
Join Date: May 2009
Model: BOLD
PIN: Ask
Carrier: Rogers Wireless
Posts: 7
|
Quote:
Originally Posted by adoshi21
new device solved the problem--must have been an issue with the "new" device i originally bought from the att buggers (i also noticed my new blackberry that i got last week also isn't "loose" around the frame like my last one--it appears i got a new "return" last time and this one is great...
only complaint is that battery life (because of 3G) isn't as long lasting as the curve or a regular phone but i love it.
|
buy a extended battery lol I haven't yet but i might plan to cuz battery life sure sucks. I can't last a day with it full from mourning last me only till night thats it i guess cuz i surf alot and txt n everything but yeah 3g sure kills the battery. Not as bad as Iphone but I can say compare to other phones the batt life sux.
|
Offline
|
|
07-28-2009, 08:28 AM
|
#7
|
New Member
Join Date: Aug 2007
Model: Curve
Carrier: AT&T
Posts: 5
|
Quote:
Originally Posted by adoshi21
new device solved the problem--must have been an issue with the "new" device i originally bought from the att buggers (i also noticed my new blackberry that i got last week also isn't "loose" around the frame like my last one--it appears i got a new "return" last time and this one is great...
only complaint is that battery life (because of 3G) isn't as long lasting as the curve or a regular phone but i love it.
|
I can confirm this ... it's a problem with the device. My volume was fine and now it's died as well :( It's most obvious when testing speakerphone... you activate speakerphone and the loudness doesn't change at all. Something electronic (or software) is causing it to use the wrong speaker I think.
|
Offline
|
|
01-02-2010, 09:06 PM
|
#8
|
New Member
Join Date: May 2008
Model: 8800
PIN: N/A
Carrier: Telstra
Posts: 1
|
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
Offline
|
|
01-03-2010, 10:42 PM
|
#9
|
Talking BlackBerry Encyclopedia
Join Date: Sep 2008
Model: 9700
PIN: N/A
Carrier: att
Posts: 373
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
from what i have done with my bold is a os upgrade and the volume came back. the grey box i have is hard plastic it doesnt lift. i think there may be a glitch in the os. some it affects some it doesnt.
|
Offline
|
|
01-04-2010, 08:26 AM
|
#10
|
Knows Where the Search Button Is
Join Date: Feb 2008
Location: Indiana
Model: 8310
PIN: N/A
Carrier: AT&T
Posts: 26
|
It's a mechanical problem with the phone. There is some PCB board that is semi-shorting out. It is a well known 9000 problem, and if while your playing a song, mp3, ringer.. you take the top of your phone and squeeze it with your thumb and index finger (hard) it will get loud, VERY loud, back to normal loud. There was a picture guided tutorial Ii found (not on this site) that documented exactly what to unscrew off the back and what solder on the PCB board to pry back away from the speaker.
I'll try to find it and update this - but I'm sure thats what your problem is.
Also FYI - the squeeze fix only works for a day or two and then it goes back to being hush hush.
__________________
Todd M
Sr. Network Administrator
|
Offline
|
|
01-30-2010, 12:39 PM
|
#11
|
New Member
Join Date: Jan 2010
Model: 9000
PIN: N/A
Carrier: AT&T
Posts: 2
|
Notifications Volume Problem
I bought my Bold in November 2009 from an AT&T store. I have the Audio Boost turned on. When I reboot (take the battery out), the notifications volume is very loud. It becomes very low hours later until I reboot again. It seems as though I have to keep rebooting to keep the volume loud.
|
Offline
|
|
03-15-2010, 05:13 AM
|
#12
|
New Member
Join Date: Feb 2009
Model: 9000
PIN: N/A
Carrier: vodafone
Posts: 3
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
Fixed it for me thanks!
|
Offline
|
|
03-15-2010, 06:14 AM
|
#13
|
Knows Where the Search Button Is
Join Date: Feb 2009
Location: Saudi - Sand Pit
Model: q10
OS: 10.1.0.23
PIN: 2AE490BC
Carrier: Mobily
Posts: 16
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
yep fix mine also lovely
|
Offline
|
|
03-15-2010, 10:44 PM
|
#14
|
New Member
Join Date: Mar 2010
Model: 9000
PIN: N/A
Carrier: Telstra
Posts: 1
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
Your a genius works like a charm.
|
Offline
|
|
03-17-2010, 10:20 PM
|
#15
|
New Member
Join Date: Jan 2010
Model: 9000
PIN: N/A
Carrier: AT&T
Posts: 2
|
Low Volume on 9000
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
I have tried this with my Bold 9000. It works for a while (as if I have rebooted), then the volume gets low again. I have to keep doing this.
|
Offline
|
|
03-18-2010, 12:26 AM
|
#16
|
New Member
Join Date: Jan 2010
Model: 9000
PIN: N/A
Carrier: Telstra (Australia)
Posts: 3
|
This fix works and suggests a paper wedge to hold the case apart to ensure it lasts Searchg here:The Unofficial BlackBerry Support Forum. search for BB bold 9000 speaker does not work.
Last edited by alexm1; 03-18-2010 at 12:29 AM..
|
Offline
|
|
03-21-2010, 05:06 AM
|
#17
|
New Member
Join Date: Mar 2010
Model: 9500
PIN: N/A
Carrier: Etisalat
Posts: 1
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
Amazing.....................just fantastic..............Thanks............but how?
|
Offline
|
|
03-31-2010, 07:41 AM
|
#18
|
Knows Where the Search Button Is
Join Date: Sep 2009
Model: 9700
PIN: N/A
Carrier: O2 UK
Posts: 27
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
This worked for me.
It's bizarre. Squeeze things, lift things, put bits of cardboard in... and all this on a very expensive phone.
Well, I don't know how long this fix will work for, but I think if the problem comes back, I will dump the phone.
|
Offline
|
|
07-20-2010, 11:53 PM
|
#19
|
New Member
Join Date: Jul 2010
Model: 9000
PIN: N/A
Carrier: AT&T
Posts: 1
|
Quote:
Originally Posted by vendetta6
Instructions to fix the low volume thing on the bold 9000.
1. Take off back plate
2. Locate the light grey box that surrounds the flash.
3. Lightly stick your fingernail under the top of the box and slightly lift.
Fixed.
|
YOU are a bloody freaking GENIUS!!! Thank you!! I can FINALLY hear my phone! I swear it's louder than when I first got it.... awesome.
*Also, my box is black plastic as well... still works. FABULOUS!!
|
Offline
|
|
08-16-2010, 09:16 PM
|
#20
|
No longer Registered.
Join Date: Aug 2010
Model: 9000
PIN: N/A
Carrier: vinaphone
Posts: 10
|
Quote:
Originally Posted by CoDudette
i've been pretty ok with the notification alerts. for the most part, i've got all my volumes set to about Medium. and i have no issues! Plus my ringtone is pretty loud in itself, 'cause it's a custom ringtone.
i've never missed an alert tbh. maybe try OS upgrade? but if you're getting a new piece, then you should wait and see if you have a problem there too..hopefully not!
|
yes, I agree with you.Thank
|
Offline
|
|
|
|