Cannot load OS... Phone keeps rebooting
I have tried everything that I can think of and I cannot get this phone working... its a Rogers Curve 8220... when the battery is in the phone and the phone is on it shows a 507 error and i cannot power off the phone without removing the battery... I have tried loading the OS through App Loader... I have got as far as some of the .cod files loading then get an error saying "Application loader was unable to connect with your device. Please re-connect our device, enter the password, if required, and click Retry." I have tried removing the battery and forcing the OS load as soon as "UNKNOWN" shows up in the connection area of Apploader... I cannot connect to Jl_Cmder as it will not see the device. I have tried the apploader /nojvm command and it does the same thing... does anyone have any other suggestions?
|
Wirelessly posted (8820)
507 = no OS ... No need to use JL_CMDER Try a different USB port. If you are using a hub or port on the keyboard, use a port on the box. Try different ports if you have to. |
Quote:
|
Have you tried a different cable?
|
Wirelessly posted (8820)
Ditto, try different cable. Also, if you have a microSD card installed, remove it. If it is a GSM BB, might not hurt to remove the SIM during the installation as well. If you are able to load the OS, replace the SIM first, activate, then try the memory card. |
Quote:
|
I may have found a resolution to my issue... it is very time consuming but as stated in the article... hopefully it will pay off!
Unbrick the Seemingly Completely Bricked BlackBerry - BlackBerry Forums at CrackBerry.com |
Find another forum to crap in.
|
Wirelessly posted (8820)
Beat me to it. Tha is nonsense. |
Check it out - he posted the same thing in three threads.
|
HELP Reload software:561
My phone won't reload the software after I try to do so, it keeps rebooting and says the phone is not connected. Can anyone help me.. appreciated
|
i'm having the same problem with an 8220 that i'm trying to revive.... tried jl_loader... tried loading cod files one by one with master control... no progress made... has anybody found any solution for this issue yet?...
|
Quote:
u can find that one in program files/common files/apploader/loader.exe connect device to computer using back USB port(one on MoBo) take battery out run loader.exe follow wizard (select advance or settings and check both boxes) before click finish put battery back click finish when u loading software without battery, actually erase all logs that should work if not call ur provider and request RIM support |
All times are GMT -5. The time now is 04:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.