BlackBerry Forums Support Community

BlackBerry Forums Support Community (http://www.blackberryforums.com/index.php)
-   RIM Software (http://www.blackberryforums.com/forumdisplay.php?f=13)
-   -   Bluetooth connect to PC (http://www.blackberryforums.com/showthread.php?t=55331)

Paul in San Diego 11-22-2006 05:05 PM

Bluetooth connect to PC
 
Installed a bluetooth dongle on my PC but I can't seem to get it to sync with the desktop software. That is when i select a connection (my choices are USB, COM4, COM7, etc...) it can't find the device. The bluetooth is enabled on the phone and is working via the desktop. Any ideas?

snowskier79 11-22-2006 05:08 PM

Has the BB "detected" or "discovered" the BT connection on your computer. Put the computer in discovery mode to locate the BT on your BB.

Paul in San Diego 11-22-2006 05:14 PM

Yeah BT has discovered the BB but when I try and add a connection via the BB desktop software it can;t find the device.

And vice a versa - the BB has discovered the BT and shows it in the "Paired Device" list.

snowskier79 11-22-2006 05:20 PM

I do not sync via BT so I am taking a stab in the dark helping you but give this a try.

Open DM (with all BT hardware turned on, i.e. computer and BB)
Click on the menu at the top on Options
Click on Connection Settings ...
Click on Detect

Just a stab at it.

Paul in San Diego 11-22-2006 05:25 PM

I give up. It seems to connect when I log on to the DM but nothing happens (as in no sync) and I can't detect the device via the DM with any of the choices.

snowskier79 11-22-2006 05:39 PM

So to clarify you believe that DM is "connecting" but nothing happens?

It sounds like you have not setup your DM correclty. You need to setup DM to synchronize with your program (i.e. Outlook, Lotus Notes, etc) where your data is located (i.e. Contacts, Calendar, etc). Once you have done that you can setup DM to automatically reconcile once connected (i.e. BT or by USB) or manually synch once you tell DM to synch.

Paul in San Diego 11-22-2006 05:53 PM

Quote:

Originally Posted by snowskier79
So to clarify you believe that DM is "connecting" but nothing happens?

It sounds like you have not setup your DM correclty. You need to setup DM to synchronize with your program (i.e. Outlook, Lotus Notes, etc) where your data is located (i.e. Contacts, Calendar, etc). Once you have done that you can setup DM to automatically reconcile once connected (i.e. BT or by USB) or manually synch once you tell DM to synch.

Well I didn't say that correctly...when I open the DM it does launch the BT on the BB but the DM says disconnected and there's no sync of files. My DM is/was set up and working fine with OE before.

Paul in San Diego 11-22-2006 06:02 PM

Well now it doesn't do anything. Very frustrating as there's ZERO instructions...

snowskier79 11-22-2006 06:08 PM

Quote:

Originally Posted by snowskier79
. . .

Open DM (with all BT hardware turned on, i.e. computer and BB)
Click on the menu at the top on Options
Click on Connection Settings ...
Click on Detect

. . .

Following these instructions does it even show your BT settings as an option or way to connect (middle section is for BT settings)? Double check that you are able to edit or enable BT through DM as those clearly are options. I would imagine if those are not enabled it would not locate your device.

Paul in San Diego 11-22-2006 06:12 PM

Quote:

Originally Posted by snowskier79
Following these instructions does it even show your BT settings as an option or way to connect (middle section is for BT settings)? Double check that you are able to edit or enable BT through DM as those clearly are options. I would imagine if those are not enabled it would not locate your device.

No. But what connection am I supposed to use? There's <none>, USB, and COM 4 through 17. I've tried them all and ZERO results. It does not find the device.

snowskier79 11-22-2006 06:15 PM

Maybe the best question is . . . What version of DM are you using? Go to Help . . . About Desktop Manager.

snowskier79 11-22-2006 06:20 PM

Quote:

Originally Posted by Paul in San Diego
No. But what connection am I supposed to use? There's <none>, USB, and COM 4 through 17. I've tried them all and ZERO results. It does not find the device.

If your device was detected it would of displayed your PIN followed by the type of connection, i.e. USB etc.

Soapm 11-22-2006 08:06 PM

Do a search, there are some entries you must see in the BB bluetooth or it won't sync. Are you on BES? They can disable the feature.

jeffmik 11-22-2006 08:14 PM

theres also a few phone firmware versions that disables bluetooth connections to the desktop (the Telstra for 7130e)

snowskier79 11-22-2006 08:51 PM

I think Paul is using an older version of DM which is the reason why he is not able to connect w/BT. My $.02 but that is my theory.

Paul in San Diego 11-23-2006 12:13 AM

DM v 4.1.1.9

Not sure if that's the right version or not. I do appreciate the help. Could be the cheapo USB dongle bluetooth I am using on my pc.

snowskier79 11-23-2006 12:32 AM

Quote:

Originally Posted by Paul in San Diego
DM v 4.1.1.9

Not sure if that's the right version or not. I do appreciate the help. Could be the cheapo USB dongle bluetooth I am using on my pc.

Nope you need DM v4.2 in order to use BT. Follow this link in order to download it:

https://www.blackberry.com/Downloads...6BD6BEEA96EE54

Also uninstall the old version from your Add/Remove Programs in Windows Control Panel.

You should be set from there. If not review the previous steps we communicated about it.

Let us know either way; cheers!

Soapm 11-23-2006 02:24 AM

Here is one thread that talks about the BES policy. They have to change these settings;

Disable Desktop Connectivity
Disable Wireless Bypass

and under services in bluetooth on the BB you have these entries

Services:
Headset
Handsfree
Desktop Connectivity
Wireless Bypass

http://www.blackberryforums.com/gene...uetooth+policy

Paul in San Diego 11-23-2006 05:41 PM

Ok, so I installed 4.2 and I do see the choice of BlueTooth in the connection setting menu but it's not highlighted and I can't select it. My bluetooth seems to be working (it says I'm connected to the PC and the blue light's flashing on the BB), but I can not sync it with the DM. Only via the USB cable. Oh well.

Soapm 11-24-2006 01:47 AM

Paul,

Are you on BES?

On the BB, when you go into options ==> bluetooth ==> options. Scroll down and look under services. Do you see these entries?

Headset
Handsfree
Desktop Connectivity
Wireless Bypass


All times are GMT -5. The time now is 07:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.