LCD Display DC Multimeter Battery Tester Monitor Meter 0~200V Voltmeter Ammeter For Sale

LCD Display DC Multimeter Battery Tester  Monitor Meter 0~200V Voltmeter Ammeter


This item has been shown 10 times.

Buy Now

LCD Display DC Multimeter Battery Tester Monitor Meter 0~200V Voltmeter Ammeter:
$15

Product Description

*PZEM-015 battery tester internal and external DC voltage current power capacity
*This meter is mainly used to test all kinds of battery's voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time, and display the measurement data through LCD screen.

*PZ-015: Measuring range 300A (using external shunt, can match 50A, 100A, 200A, 300A four shunts).

*Voltage measurement range: 0-200V. (When the test voltage is <8V, please use the independent power mode)

*Minimum voltage resolution: 0.01V

*Voltage start test voltage: 0.05V

*Voltage measurement accuracy: 1%

*Current measurement range: 0-300A (type: PZ-015) can be set 50A, 100A, 200A, 300A four ranges depending on the external shunt, the factory default value is 100A.

*Current minimum resolution: 1mA

*Current start test current: 10mA

*Current measurement accuracy: 1%

*Power measurement range: 0-60000W

*Power minimum resolution: 0.01W

*Power start test power: 0.2W

*Power measurement accuracy: 1%

*Impedance = voltage / current

*Impedance measurement range: 0-1000 Ω (displayed "--" when the test range or current is zero)

*Minimum impedance resolution: 0.1Ω

*Impedance measurement accuracy: 1%

*Internal Resistance Minimum resolution: 1mΩ
*Internal Resistance Measurement accuracy:1%
(Note:Note: Before you test the internal resistance, you should preset the full voltage depend on the battery type, after it is fully charged you can use it to test; if you do not fully charge it, you can set the battery without load voltage is the full voltage, then test; the internal
resistance is not a fixed value, the more the battery discharged, the bigger the resistance.)

Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.
Dump energy is calculated via the current battery voltage value, before test you should preset the full voltage and the cut-off voltage
depend on the battery type; every grid voltage = (the highest voltage – the lowest voltage) / 10.
*Accumulate energy consumption
*Measuring range: 0~9999kWh (Over the test range will become zero.)
*Minimum resolution: 1Wh
Measurement accuracy:1%
(Note: 1Wh=0.001kWh=0.001 Kilowatt)
*Running time Measuring range: 0 ~ 999 hour (without load the time will not accumulate)
*Display format: 0:00:00 ~ 999:59:59 (Over the test range will become zero.)
*This meter has two modes: normal display mode and dormant mode. In normal display mode, short press the button to enter the
dormant mode, in order to reduce the whole machine power consumption, the backlight and LCD display will be turned off in dormant
mode. In dormant mode, short press the button will switch to the normal display mode.
Note: The meter will stop all measurement functions in dormant mode, so please do not switch to dormant mode if normal
measurement is performed.
*Power consumption
*Normal working state: 0.03-1.2 W
*Sleeping state: 0.5mW-0.5W
(The power consumption is related to the test voltage value, the higher the voltage,the greater the power)
*Working temperature:-20C ~ +60C.

1 * Shunt


Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Payment

We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.

Delivery details

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further us

We strive for 100% customer satisfaction! Positive response is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.


On 25-Oct-19 at 22:31:53 EDT, seller added the following information:



Buy Now

Smt Smd Component Welding Practice Pcb Board Soldering Plate Diy Suite New Hot picture
Smt Smd Component Welding Practice Pcb Board Soldering Plate Diy Suite New Hot


Load Cell Amplifier 4-20ma Load Cell Transmitter 0-10v Weight Transmitter Linear picture
Load Cell Amplifier 4-20ma Load Cell Transmitter 0-10v Weight Transmitter Linear


Popular Forums