Keithley 7002 Switch System 10-Slot Mainframe W/10x 7036 40ch Relay Switch Cards For Sale

Keithley 7002 Switch System 10-Slot Mainframe W/10x 7036 40ch Relay Switch Cards


This item has been shown 36 times.

Buy Now

Keithley 7002 Switch System 10-Slot Mainframe W/10x 7036 40ch Relay Switch Cards:
$1,398

KEITHLEY7002 Switch System 10-Slot Mainframe W/10x KEITHLEY 7036 40ch Relay Switch Cards
400-Channel Matrix Switch System Scanner
THIS SALE CONSISTS OF:1x KEITHLEY 7002 system switch that hold 10 cards10 KEITHLEY7036 40ch Relay Switch Card (400 channels in total; a full and complete system).This is a fine system in perfect condition. The lab that has been taking care of it has completed its operation and so we are selling-off the equipment. It was purchased for one process and has never left the clean-room. SEE THE PHOTOS to know the pristine condition of this excellent system.
Keithley 7002 specification
10 plug-in cards per mainframe.
MEMORY: Battery backed-up storage for 500 switch patterns.
SWITCH SETTLING TIME: Automatically selected by the mainframe. For different switchcards, 7002 will be set to the slowest relay settling time. Additional time from 0 to 99999.999 seconds can be added in 1ms increments.
TRIGGER SOURCES: External Trigger (TTL-compatible, programmable edge, 600ns minimum pulse, rear panel BNC).IEEE-488 bus (GET, *TRG) Trigger Link Manual (front panel) Internal Timer, programmable from 1.0ms to 99999.999 seconds in 1.0ms increments.
STATUS OUTPUT: Channel Ready (TTL-compatible signal, rear panel BNC). Low going pulse (10µs typical) issued after relay settling time.
SWITCHING SEQUENCE: Break-before-make (programmable).
MAINFRAME DIGITAL I/O: Four open collector outputs (30V maximum, 100mA maximum sink current, 10W output impedance), one TTL compatible input, one common, one +5V.
RELAY DRIVE: 3.5A maximum for all 10 card slots.
CARD SIZE: 32mm high × 114mm wide × 272mm long (11 ⁄4 in × 4½ in × 103 ⁄4 in).
CARD COMPATIBILITY: Fully compatible with all 7001 cards.
ANALOG BACKPLANE SIGNALS: Four 3-pole rows (Hi, Lo, Guard). These signals provide matrix and multiplexer expansion between cards within one mainframe.
MAXIMUM VOLTAGE: 250V DC, 250V rms, 350V AC peak, signal path to signal path or signal path to chassis.
MAXIMUM CURRENT: 1A peak. PATH ISOLATION: >1010W, <50pF path to path (any Hi, Lo, Guard to another Hi, Lo, Guard) >1010W, <50pF differential (Hi to Lo or Hi, Lo to Guard). >109 W, <75pF path to chassis.
CHANNEL CROSSTALK: <–65dB @ 1MHz (50W load).
BANDWIDTH: <3dB loss at 100MHz (50W load).
Keithley 7036 card specification
RELAY SWITCH CONFIGURATION: 40 independent channels of 1-pole switching.
CONTACT CONFIGURATION: 1 pole Form A.
CONNECTOR TYPE: 96-pin male DIN card connector.
MAXIMUM SIGNAL LEVEL: 60VDC, 30V rms, 42V peak between any two inputs or chassis, 1A switched. 30VA (resistive load).
CONTACT LIFE: Cold Switching: 108 closures. At Maximum Signal Levels: 105 closures.
CHANNEL RESISTANCE (per conductor): <1Ω.
CONTACT POTENTIAL: <4µV per contact.
OFFSET CURRENT: <100pA.
ACTUATION TIME: 3ms.
ISOLATION: Channel to Channel: >109Ω, <25pF. Common Mode: >109Ω, <100pF. CROSSTALK (1MHz, 50Ω Load): <–40dB.
INSERTION LOSS (50Ω Source, 50Ω Load): <0.3dB below 1MHz, <3dB below 10MHz.
RELAY DRIVE CURRENT (per relay): 16mA. EMC: Conforms with European Union Directive 89/336/EEC EN 55011, EN 50082-1, EN 61000-3-2 and 61000-3-3, FCC part 15 class B. SAFETY: Conforms with European Union Directive 73/23/EEC EN 61010-1, UL 3111-1.
ENVIRONMENT: Operating: 0° to 50°C, up to 35°C at <80% R.H. Storage: –25°C to 65°C.


SATISFACTION GUARANTEED- 14 DAY USA return policy (minus S&H-&-)


This system can be PICKED-UP LOCALLY FREE OF CHARGE, or SHIPPED ANYWHERE IN THE WORLD.


We offer a 14-DAY satisfaction guarantee / warranty for full refund, minus shipping & handling fees.

For purchases outside of the United States, we invite buyers wanting to export the item to have a local A2LA

Our store accredited facility, or other mutually approved intermediary to inspect the system prior to final export.

SATISFACTION GUARANTEED- 14 DAY USA return policy (minus S&H-&-)


Our store has a perfect record of trust selling the highest quality high-end test & measurement equipment since 1990

Preferred payment method is via x-fer or upon pickup – If PayPal or CC is used, buyer pays 3.5% PayPal/CC fee

BANK WIRE TRANSFER ONLY FOR ITEMS EXCEEDING $5000 USD - CONTACT FOR DETAILS

SATISFACTION GUARANTEED- 14 DAY USA return policy (minus S&H-&-)

* * * WE SHIP WORLDWIDE * * *

* * * SAFE & RELIABLE FREIGHT PACKING & SHIPPING* * *

* * * SATISFACTION GUARANTEED – 14-DAY USA RETURN POLICY (Minus S&H-&-) * * *

!!! GOOD LUCKofferDING !!!

* * * CALL: +1.303.931.8823 WITH ANY QUESTIONS * * *

SATISFACTION GUARANTEED- 14 DAY USA return policy (minus S&H-&-)





Buy Now

Milwaukee Power Tools 14-20-0032 / 14200032 (new In Box) picture
Milwaukee Power Tools 14-20-0032 / 14200032 (new In Box)


Mersen Atm-r-30 / Atmr30 (new In Box) picture
Mersen Atm-r-30 / Atmr30 (new In Box)


Mersen Ot-10 / Ot10 (new No Box) picture
Mersen Ot-10 / Ot10 (new No Box)


Popular Forums