When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Power Team C1010CBT
ENERPAC RA1010
OTC 4105A
BVA HT1010 (THREADED BOTTOM 1-1/4 NPT FEMALE)
RAM PACRC-10-SA-10A
PRICED HUNDREDS LOWER THAN THE BIG NAME BRANDS, SAME EQUAL QUALITY
If you are intowhat is the “last price” “Lowest price”“Disposable” chinese junk this is not for you.
These cylinders are for the buyer who requires QUALITY – RELIABILITY – LONGEVITY – REBUILDABILITY.
ASSEMBLED AND TESTED IN THE U S A
The cylinder is rated at maximum output of 10 tons. Bear in mind that tonnage is reached when powered by hydraulic fluid at 10,000 PSI (700 Bar).NOTE:your pump or power unit can be powered / fed by air, electric or fossil fuels, however the oil output must be 10,000 to achieve max tonnage. The cylinder will work fine at lower PSI, however the tonnage will be lower.Each 1,000 PSI is almost same in Tonnage (Approx.) E.g.2,000 = approx. 2.2 tons.
NOTE: Your hydraulic hose supply must be “True Jack Hose” 10,000 PSI – 700 Bar with a minimum 2 – 1 safety factor so working pressure @ 10,000 and burst pressure would be at @ 20,000.
10 inch stroke
We can supply hoses adapters and bases to assist you, please contact us.
As a courtesy we include at no extra charge the male side of the quick disconnect coupling and a replacement seal (OEM) for future rebuild, thisamountsto a $50.00 value.
Hydraulic Cylinder Welded Double Acting 2" Bore 16" Stroke Cross Tube 2x16 NEW
$215.25
Hydraulic Cylinder Welded Double Acting 1.5" Bore 18" Stroke Cross Tube 1.5x18
$193.20
Hydraulic Cylinder For Loader Welded Double Acting 1.75" Bore 14" Stroke NEW
$192.15
Popular Forums