AC 60-260V100A Digital Ammeter Voltmeter Power Meter w/ T16 Open clamp LCD For Sale

AC 60-260V100A  Digital Ammeter Voltmeter  Power Meter w/ T16 Open clamp LCD


This item has been shown 6 times.

Buy Now

AC 60-260V100A Digital Ammeter Voltmeter Power Meter w/ T16 Open clamp LCD :
$16

T16 open clamp AC LCD Display Digital Multimeter Ammeter Voltmeter 80~260V 100A Power Meter with T16 clamp (AC Current Dry-Type)Current sensor

16MM, real 0-120A input .12V voltage protection






Specification:
- The working voltage: 80-260VAC
- Test voltage: 80-260VAC
- Max power: 100A/22000W
- Working frequency: 45-65Hz
- The measurement precision: Class 1
About Function:
- Measurement and monitor the electrical parameters(voltage, current, kwh, watt)
- Overload alarm function(more than watt alarm threshold, backlight flashing)
- Power alarm threshold preset function(can set up their own power alarm threshold)
- Power(kwh)button reset function
- When power off ,store the data, when on ,continue the date
- Large screen LCD liquid crystal screen full display function(voltage, current ,kwh,watt)
- Backlight function
About Display:
Display interface. By the large screen LCD display LCD monitor voltage and current,kwh,watt,electric parameters
1. Watt: the measurement range of 0-22kW
less than 1kW: 0.0-999.9W
less than 10kW: 1000-9999W
less than 22kW: 10.0-22.0kW
2. kwh: the measurement range of 0-9999kwh
less than 10kWh:0-9999Wh
more than 10kWh:10-9999kwh
3. The test voltage range of 80-260V
Display format 80-220V
4. Current test range:0-100A
Display format: 0.00-99.99A
About Button:
- Backlight control
can turn on/off backlight by short press
- Power reset
Step 1: long press the button (about 5 seconds),til display flicker, then release the button
Step 2:if short time press the button again, the power(kwh)reset zero and exit flicker
Step 3:if long time press button for 5 seconds until it is no longer flicker, power(kwh)data is not cleared and exit
- Set the alarm(watt)
Step 1: long press the button, till the LCD screen display "SET CLr",release the button
Step 2: show the alarm (watt)value,short time press, value (number)increase
don't press the button for 3 seconds, the setting switch to other bit
Step 3: long time press the button(about 5 seconds)---->save the threshold watt value
threshold setting watt range:0-22.0kW
Notices:
1. Suitable for indoor ,not outdoor
2. should not exceed te rated power
3. wiring can not be wrong
About Current Sensor:


Package Included:
1 x AC 100A Power Meters Monitor Volt Amp kWh Watt Digital Cambo Meter
1 x CT



Buy Now

Brand New Maxcom Mx-sfp125 Tester With Case picture
Brand New Maxcom Mx-sfp125 Tester With Case


Dc Multifunction Battery Monitor Meter,0-200v,0-100a (widely Applied To 12v/2... picture
Dc Multifunction Battery Monitor Meter,0-200v,0-100a (widely Applied To 12v/2...


Omega Digital Manometer Hhp102m 1.999/10.00 In H2o W/ Tubes picture
Omega Digital Manometer Hhp102m 1.999/10.00 In H2o W/ Tubes


Vintage Amprobe Ultra Clamp On Meter, Usa Made picture
Vintage Amprobe Ultra Clamp On Meter, Usa Made


Popular Forums