This item has been shown 43 times.
It is a ZVS high frequency drive heater.It can be used for DIY players to quench, annea and other heat treatments for small parts. It can also be used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. The heating is even and fast, very convenient.
1>.Low operating voltage
2>.1000W ultra high power
3>.Stable high temperature
4>.High power heat sink
1>.Work Voltage:DC 12V~36V
2>.Work Current:10A at 12V and >15A if more than 15V(20A is the biggest)
7>.Copper coil inside diameter:52.2mm
8>.Copper coil outer diameter:62.5mm
10>.Copper coil size:240*62.5*62.5mm
1>.The higher the voltage, the greater the current that needs to be input. As a result, the higher the heating power, the faster the heating rate.
2>.Please use a stable power supply, otherwise it will damage the components.
3>.It can't heat large volumes of metal.
4>.The heated metal cannot directly contact the copper coil.
5>.The distance between the heated metal and the inner diameter of the copper ring is more than 2cm.
6>.The metal must be placed in the copper coil before the power is turned on, otherwise the module will be damaged.
7>.Recommended for higher voltages such as 36V.
8>.Please keep good heat dissipation conditions.
1>.1pcs 1000W ZVS Induction Heating Board ZVS Driver High Voltage Generator Heater
2>.1pcs Copper coil
3>.4pcs Copper column